• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

OMG, stubborn PCI slot!

X

xalar

Member
Trying to replace a SB Audigy2 Value w/ a SB Audigy2 ZS... the Audigy2 Value has been in the slot for two weeks, and it's quite warm in my apartment. I am completely unable to pull this card from the slot... almost bloodied my finger trying to pry it out. Tried gently rocking it in the slot, brute force [but not too much, didn't want to tear the freaking slot out w/ it], and what have you, to no avail. Any tips for dealing with stubborn PCI slots? I was thinking it might be the heat [expands, etc], so am going to try it again after it cools off tonight.
 
Originally posted by: amplemind
Sorry to hear about your predicament...may I ask why you would upgrade from the Audigy2 Value to a ZS model?
Click to expand...

Circumstances put me in possession of a ZS for less than the Value cost me. Planning on returning the Value to 'ol Best Buy. 🙂
 
Did you back out the screws in the neighboring slots? I know in one of my older cases, the screws from the neighboring slots would overlap on the slot cover above it, making it impossible to remove pci cards.
 
Originally posted by: AsianriceX
Did you back out the screws in the neighboring slots? I know in one of my older cases, the screws from the neighboring slots would overlap on the slot cover above it, making it impossible to remove pci cards.
Click to expand...


Aye. The "top" of the slot is completely clear, and unscrewed.
 
Are you lifting perpendicular to the motherboard and not at one end (effectivly rotating the card)?
 
Originally posted by: JToxic
Are you lifting perpendicular to the motherboard and not at one end (effectivly rotating the card)?
Click to expand...


Yes, pulling up from the mobo by both ends of the soundcard.
 
try getting the computer cooler somehow if you think heat has caused it?
as in, do it in front of the air conditioner

maybe its just a ploy from best buy to make sure you dont return it
 
Try giving it some force. I had a heck of time pulling out a NIC, when the card finally let go I nearly fell over.

Be careful where you place your hands, you dont want to rip off a capacitator or something if you slip. *thinks about time I ruined a good 9800 pro*
 
pull that is all i can think of look around alot make sure its not connected in anyways shouldnt be that hard sumthing isnt right.

edit: if you cant get it out stick ur other sound card in another slot disable the value one and you will be fine.
 
Originally posted by: w00t
pull that is all i can think of look around alot make sure its not connected in anyways shouldnt be that hard sumthing isnt right.

edit: if you cant get it out stick ur other sound card in another slot disable the value one and you will be fine.
Click to expand...

Lol, you wouldn't be saying this if it was your mobo. Easier said than done.

For the guy who said why upgrade from a Audigy 2 Value? Because the Value as no sound processor. It is the exact same version as the Audigy, but no sound processor. It's like an Audigy LS, same as an Audigy, no processor. Works fine if you have a P4-like CPU or AMD XP, 64 where bottlenecks of CPU usage will become almost negligible.

As for the card, I'd suggest you contact tech support for the mobo if everything you've tried doesn't cut it.


**USE AT YOUR OWN RISK:
You can try using an oily substance like Vaseline. Carefully use a very thin stick to insert the vaseline into the PCI slot, on both sides. Then lightly rock the daughter card, pulling outwards. Continue rocking and slowly pulling the card, holding it from as much of its edges as possible, as someone mentioned earlier, you don't want to pull off transistors or any small peices. The card will eventually come out after many-many minutes of rocking and pulling. When you're done, use a powerfully thin vaccuum tube to suck out any excess material within and around the PCI slot. After that's over, clean out whatever vaseline has gotten into the slot (and the daughter card).
 
Whoa Valkerie, WTF is an Audigy2 Value if there is no sound processor? How is the quality any better than onboard then?

Lol, anyways, thanks though, just saved me from ordering the Value off newegg, going with ZS now for 22$ more.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top