OMG! I just picked up the Logitech Z-680

AmdInside

Golden Member
Jan 22, 2002
1,355
0
76
Well, its not for me. Its for work for a test system but I set it up and OMG. I can't believe how nice and clean the audio is. I've been out of the loop for a while when it comes to audio. Been using some cheap 2.1 Altec Lansing speakers at home but after hearing these speakers, it makes my speakers sound like some old speakers from the 60's compared to these speakers. I wish Christmas wasn't coming up so I could afford to buy these speakers for myself. I can't imagine any other speakers sounding any better than these. You have to hear for yourself.
 

mrman3k

Senior member
Dec 15, 2001
959
0
0
I really want 3D Sound Surge to review them and compare them to the Klipsch 5.1s. I do think the 680s will be very good, probably like the 560 vs. Klipsch 4.1
 

dexvx

Diamond Member
Feb 2, 2000
3,899
0
0
Originally posted by: mrman3k
I really want 3D Sound Surge to review them and compare them to the Klipsch 5.1s. I do think the 680s will be very good, probably like the 560 vs. Klipsch 4.1

They are usually slow to review, but their reviews are top-notch.
 

GTaudiophile

Lifer
Oct 24, 2000
29,767
33
81
LogiTech makes some good-sounding speakers. I prefer them to Klipsch. I just wonder if LogiTech skimps on quality as I've heard too many Z-560s biting the dust.

*GTa <--- This audiophile will continue to rock on with his Boston BA7800s...Boston 0wnz!
 

SithSolo1

Diamond Member
Mar 19, 2001
7,740
11
81
Were you using the Altec Lansing ACS-295 system? Thats what I have. Anyway, how much did the system cost?
 

AmdInside

Golden Member
Jan 22, 2002
1,355
0
76
Originally posted by: Lore
Look here

AmdInside: Do you have any of those problems?

In summary: hissing, clicks and pops, etc.


"As one of the early adopters for this product, I and other end-users noticed a lot of things that the reviewers either didn't notice or didn't have in their test units. I know the Logitech Z-680 is a popular product that a lot of people are looking forwards to, but do be aware of these issues.

The biggest problem is the hissing that comes through the speakers in any input mode, even if there is nothing connected. You can even have it on mute and the speakers will still hiss. You can actually hear the hiss even when you're about 3 feet away (So with the speakers on your desk, you should be able to hear the hissing). This hissing can be heard through music played back at low volume and can overwhelm classical pieces at low volume. Quite annoying. The hissing is unaffected by how high or lwo the volume control is set."

I can faintly hear the hissing sound when the volume is set half way. When no sound is coming from my computer, the hissing only gets annoying to me when the volume is 3/4 high. I don't get any hiss when the volume is set to mute.

"The second problem is the clicks and pops that you get when you're switching modes between the different inputs. Whether you're in digital or analog mode doesn't matter as the decoder tries to figure out what sort of stream you're feeding it and will in turn click and pop as it's switching modes. When you switch modes, you can actually hear the hissing get louder for a second as the decoder gets ready for the new stream.

The clicks and pops are especially bad when you are watching a DVD and the menus keep cycling; the clicks and pops occur everytime the audio stream (whether it's DD5.1 or ProLogic II or simply Stereo) refreshes. So if you're watching a bonus feature DVD and are navigating the menus to get to the deleted scenes (for example) it will click and pop loudly everytime you hit "enter" and navigate one level deeper (or up)."

So far, this hasn't bothered me. I have to do more testing though. It would probably bother me after a while since I have to do a lot of navigating during testing.

"Lastly, the volume control knob is digital and senses your turns; sometimes this is very inaccurate, allowing your speakers to jump up in volume even when you're trying to turn it down. It's never consistent how many notches each turn will bring down the volume. Sometimes you can hear soft clicks and pops as the volume is adjusted."

No problems with volume. I don't hear any clicks or pops when lowering or raising the volume.

"Exchanging these for another set doesn't matter. The other two people I've talked to are both on the East coast and they have the same problems as me. One guy exchanged his three times at two different stores, I exchanged mine twice (at two different stores), and one other guy is still hanging on to his pending a solution from Logitech."

Oh well. Its the only one I've purchased. I still like it enough to where I might buy it for my home PC. But it will have to be after Christmas. Hopefully, I can find a good deal by then.
 

Entropy007

Senior member
Apr 18, 2000
252
0
0
<FONT face=Verdana size=1> OMG! I just picked up the Logitech Z-680

Was it heavy or something?:)</FONT>
 

AmdInside

Golden Member
Jan 22, 2002
1,355
0
76
Originally posted by: Entropy007
<FONT face=Verdana size=1> OMG! I just picked up the Logitech Z-680

Was it heavy or something?:)</FONT>

Well, the box was huge. And the sub is bigger than the sub in my home entertainment system. :eek:
 

Lore

Diamond Member
Oct 24, 1999
3,624
1
76
I can faintly hear the hissing sound when the volume is set half way. When no sound is coming from my computer, the hissing only gets annoying to me when the volume is 3/4 high. I don't get any hiss when the volume is set to mute.

So when you have the speakers on, but nothing connected, and you put your ears next to your speakers, you don't hear anything? Where did you buy yours? :)



The clicks and pops are especially bad when you are watching a DVD and the menus keep cycling; the clicks and pops occur everytime the audio stream (whether it's DD5.1 or ProLogic II or simply Stereo) refreshes. So if you're watching a bonus feature DVD and are navigating the menus to get to the deleted scenes (for example) it will click and pop loudly everytime you hit "enter" and navigate one level deeper (or up)."

So far, this hasn't bothered me. I have to do more testing though. It would probably bother me after a while since I have to do a lot of navigating during testing.

But it does do the clicks and pops right?

"Lastly, the volume control knob is digital and senses your turns; sometimes this is very inaccurate, allowing your speakers to jump up in volume even when you're trying to turn it down. It's never consistent how many notches each turn will bring down the volume. Sometimes you can hear soft clicks and pops as the volume is adjusted."

No problems with volume. I don't hear any clicks or pops when lowering or raising the volume.

When you are turning the knob, do you have problems with having it increase or decrease the correct amount of volume (you turn one notch and it'll go up one notch instead of going up -- or worse, down -- three notches?) The two units I tried will jump around; I can turn it one notch to the right and it may not respond at all, but if I turn it two notches it might jump up four bars in volume.
 

Xernex

Senior member
Jul 15, 2002
304
0
0
Do these porblems only affect the Z-680? Or other logitech speakers like the Z-640's?

Slightly off topic but does anyone have experiance with the Z-640's? They any good? Or with an Audigy 2 + Creative inspire 6600(6.1) speakers?