ok my duron will not go any further, can someone help me

[gplracer]

Ok here is the deal. I built three systems. Two of the duron 600's would only do 850mhz in mine. One did 900mhz. I kept that one. After about 4 days I had to reboot and all of a sudden it locks after the windows me screen. I have to back it down to 850mhz. Everything is fine. Then my friend calls today and says, "I got that duron to do 900mhz" It would only do 850mhz in mine! Now mine only does 850mhz. He said his cpu is between 48-50c. Mine never goes over 46-37c but locks at 900mhz. There must be something I am doing wrong!

 

[abracadabra1]

try upping the voltage to 1.85, see if that adds stability.

if your duron is running at 900 'selectively', then you need to drop it down to 850 and keep it there.
here are a couple of things you can do to get some more out of that system.
1) run that great ram of yours at a speed indepedent of that of the fsb
2) try upping the fsb speed instead of the multiplier (e.g.- 8.5X110)
3) pray she'll burn-in

 

[gplracer]

Well........ my cousin sent some artic silver. The duron is back at 900mhz for now so far while suring the cpu as been as 43-44c.