OC Help

ktinos

Junior Member
Nov 19, 2002
5
0
0
1) axp 2500+ on a7n8x deluxe

fsb set to 200 and vcore at 1.725 before stable. at 1.7 can only prime for 7 mins. is the vcore ok?
also the temp readings i get on pc probe is ard 45 no load and 55 load. is it too high? cos bios temps are ard 57 idle. so i guess load would be ard 67.

2) P4 2.4C on p4c800

going to set fsb at 250 and thinking of setting rams at 1:1 but it's only a twinmos dual channel kit ddr 400 with heat sink. is is feasible without frying them?
 

Fern

Elite Member
Sep 30, 2003
26,907
174
106
1) vcore and temps look fine on the Barton. Nice job, mine won't hit FSB 200 at that vcore.

2) Donlt know how voltage you'll need. Use memtset86 and see what the ram can do before unstable. Any way it's a intel system and I understand running out of synch is not a hit to performance. Of course, you can use a 5/4 divider if the ram can't cut it.