@ 2133mhz using 1.6v right now.
I've posted all the way up to 142fsb, but when I shutdown, won't even boot up the next time and have to reset bios to 2133mhz again. Here's the thread on my system.
Would it be a good idea to take out all the peripherals, USB, SCSI devices, etc. and start with a barebones setup, just using the video card to try and get to as high an FSB as possible. And then start adding each peripheral one by one (after successfully running stress tests) at that FSB, to see which one is the culprit.
Seems logical to me, what do you think?
BTW, I've also installed an Enermax 350Watt PSU since my last thread and I plan to use some Arctic Silver 3 as well to help things out.
Thanks in advance!
I've posted all the way up to 142fsb, but when I shutdown, won't even boot up the next time and have to reset bios to 2133mhz again. Here's the thread on my system.
Would it be a good idea to take out all the peripherals, USB, SCSI devices, etc. and start with a barebones setup, just using the video card to try and get to as high an FSB as possible. And then start adding each peripheral one by one (after successfully running stress tests) at that FSB, to see which one is the culprit.
Seems logical to me, what do you think?
BTW, I've also installed an Enermax 350Watt PSU since my last thread and I plan to use some Arctic Silver 3 as well to help things out.
Thanks in advance!
