no beep

[crion]

hi all,

i've just built a new PC:
AMD Athlon 64 X2 Dual Core 5000+
Asus M2R32-MVP
2xHIS ATI X1900 512MB ICEQ3
G.Skill 2GB PK PC2-6400
Zalman CNPS9500-AM2
Seasonic M12 600W
Antec P180

the thing is, i connected & plugged everything in, switched it on &... all fans are spinning, the leds are lit, drives were started, but nothing happens - no video signal is being sent to my monitor, no bios beep... after a while i realized there's no case speaker in P180, so i borrowed 1 from my friend. i removed rams, gfx, switched them, used only 1, but still no beeps & no change - wtf?

any ideas?

 

[stogez]

Do the AM2 boards have the separate 4pin power connector? Maybe you forgot to plug that in.

 

[crion]

it is plugged in

 

[Gautama2]

Does the monitor work? 😵

 

[pkme2]

Another thread had similar problem.

Do what seems to be the standard check.

Disconnect everything and run basic components. Remove hdd and dvd-cd.

Run mobo, cpu, video card, RAM. Do you get anything?

By the way, did you plug in this?
http://www.mechbgon.com/build/ATX12VS.jpg



On the other two threads, bad RAM and bad CPU were the culprits. Try using 1 stick of RAM first.