• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

nm

Hi ,

I have 2 x 256mb Corsair XMS 3200 C2 running in LanParty NF2 in dual channel and it ran fine in Prime95.

I also had my Corsair in my EPoX 8rda+ running dual channel and it was fine in Prime 95.

I suggest you try tweaking your settings a bit more and if that dosent work then it could be the chips or mabye controller on the board.

My setting are :-

6 - 3 - 3 - 2 @ vDimm 2.7v and on my LanPartyNF2 i changed it from (SPD) to 1:1 because SPD was giving my problems.

Also i would try running the CPU at default FSB (or lowest) settings first off with the Mem running async.

anyway good luck and i hope you get it running ... :beer:


<b> P.S I also have some 2 x 256mb Geil 3200 memory that runs great in both EPoX 8RDA+ and the LanParty NF2.
 
Just an FYI, I'm using generic PC2100 @ 5 2 2 2.0 in Dual Channel with no probs. 🙂 FSB is at 333
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top