• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Newegg.com - AMD 1035T X6 for $124.99

Status
Not open for further replies.
superccs said:
13X multiplier? You getting to 4Gz with turbo on right?
Click to expand...

Mine came 100% unlocked. I have a thread about it

Sadly I just sold it with a GTX 570 for cash as I didn't really need it for the Res I play at.

MINE:

http://valid.canardpc.com/show_oc.php?id=2053336

2053336.png


2053336.png
 
Last edited:
Got 1. Thanks.

Apparently there are some units with unlocked multiplier O.O. But even if mine will be locked and I will be able to get FSB to 250Mhz, I'll be fine with 3.25Ghz + Turbo (w/e that would boost it to) 🙂
 
If you have a heatsink already and were thinking of getting an FX-6100, get this instead. Much cheaper, and faster when both are overclocked. Phenom II X6 @4.0GHz=FX-6100@4.3-4.4GHz.
 
Just ordered one. Thanks.

This will be a nice drop-in replacement for an old AII X2 system. I was thinking about building a whole new system just in time for the annual DC holiday races that usually start soon. This year, I wanted to participate again, but building a new box that doesn't get a lot of use (mostly use my work pc and my laptop) would cost me money I really don't want to spend, so this is perfect (and I'll have some extra to participate in Child's Play again). Last year, I put together an AII X3 budget box in November, tested it by doing holiday Folding and DC stuff for a month, and then ended up giving it to relatives as a gift. Six threads folding, or running BOINC projects for $125 will be nice, as well as economical, especially if I can get the CPU to OC a little.
 
I jumped on this for my basic system. It had a Popus 820 in it which wasn't that bad. I'm running on a cheap board ECS A780GM-M3 (V1.0) 95w which has very little OC functions. (No core voltage adj just FSB/HT/MemDiv)

I threw it in, checked it at base speed, dropped the HT to 1800, memory div to 333 from 400, and set the FSB to 230 = 3mhz and it runs like a charm.

I definitely notice the 6mb L3, it's much snappier.

Running 15% OC on a 95w board could be a bit taxing, we'll see.
 
Status
Not open for further replies.

TRENDING THREADS

Back
Top