Hey everybody. I've never put together a system before so I thought I'd make a post here to see if anybody can point out any huge flaws in my plan, so any advice would be much appreciated ;-P
Here are a list of the major components I plan on putting togeher...
AMD Athlon 64 3200+ 512KB L2 Cache (Retail)
MSI K8N Neo Platium socket-754 nForce3 250GB (Retail)
Mushkin 184 Pin 1GB(512MBx2) DDR PC-3500 Level One Dual Pack - Retail
Seagate ST3200822A (200GB) Baracuda 7200RPM SATA (8MB cache) (OEM)
Aspire X-Dreamer II(Black) ATX Mid-Tower Case With 350W Power Supply (ATXB4KLW-BK/350)
Antec TruePower 480watt
I plan on also putting in a GeForce 6800 Ultra, but still a little unsure on what manufacturer to go with. They don't seem to be too readily available right now so I was wondering if it really made all that much difference. I've been seeing the eVGA version around a lot of places. I may go with that if it doesn't make too much difference.
The only other real concern I have is my memory choice. I know the boards will only officially support ram as high as pc3200, but I hear pc3500 will work perfectly fine. But even then I'm a little shaky when it comes to recognizing good ram from bad, and making sense of timings and latency.
Any input would be great. thanks guys.
Here are a list of the major components I plan on putting togeher...
AMD Athlon 64 3200+ 512KB L2 Cache (Retail)
MSI K8N Neo Platium socket-754 nForce3 250GB (Retail)
Mushkin 184 Pin 1GB(512MBx2) DDR PC-3500 Level One Dual Pack - Retail
Seagate ST3200822A (200GB) Baracuda 7200RPM SATA (8MB cache) (OEM)
Aspire X-Dreamer II(Black) ATX Mid-Tower Case With 350W Power Supply (ATXB4KLW-BK/350)
Antec TruePower 480watt
I plan on also putting in a GeForce 6800 Ultra, but still a little unsure on what manufacturer to go with. They don't seem to be too readily available right now so I was wondering if it really made all that much difference. I've been seeing the eVGA version around a lot of places. I may go with that if it doesn't make too much difference.
The only other real concern I have is my memory choice. I know the boards will only officially support ram as high as pc3200, but I hear pc3500 will work perfectly fine. But even then I'm a little shaky when it comes to recognizing good ram from bad, and making sense of timings and latency.
Any input would be great. thanks guys.