New Rig, is it all compatible?

[markjonesx]

Hi Guy,

I'm looking to construct a new rig, specs below, I'd like to know if anyone can see any issues with any of the components not interfacing properly. I'm particulary interseted in the motherboard to RAM and Graphic card FSB's.

1. EVGA 122-CK-NF68 NF680i SLI, S775, PCI-E(x16), DDR2 1200/533/667/800, SATA II, SATA RAID, ATX

2. 2 X 768MB EVGA 8800GTX KO Superclocked PCI-E 2000MHz GPU 626MHz 128Streams Dual DVI-I/HDTV ACS3 Arctic C

3. Intel Core 2 Extreme Quad-Core QX6700, 775, 2.66GHz, 1066MHz FSB, 8MB Cache, Retail

4. 2Gb (2X1Gb) Corsair TwinX DDR2 XMS2 Dominator, PC8500, 240 Pin, Non-ECC Unbuffered,CAS 5-5-5-15, EPP

5. 1100W Tagan Quad SLi V2 Quiet 21db Also support 12v EPS/SATA/XEON 3 Years Warranty ATX/BTX


Zalman CNPS9500-AT Intel LGA775 Aero Flower Cooler

 

[yh125d]

Should all be compatible. I don't know about the ram pickiness, but it should work.

Consider this PSU though
http://www.newegg.com/Product/Product.asp?Item=N82E16817153043

 

[ShellGuy]

all look ok with but i would go with Seasonic i have the 380 and it rocks or FSP Group as they are another good company, all in all looks good though

 

[moosey]

The PC P&C 750 should be fine with that and save ~$100.
Here's a Silverstone 850W option as well.
The Tagan is a quality unit but if you needed to save money these options are available. As long as its a quality unit you should be fine to go. Look at the case of the
Corsair 620W

Here's the SLI ZONE list.

Also, you seem like you really want to o/c so I'd go with a better CPU cooler.

Is $330 memory necessary to o/c that thing? Wouldn't DDR2-800 do fine?
Patriot
Crucial
Corsair XMS
Corsair Dom