New build, cpu voltage issue

[alreadylost33]

Hey guys. I built my computer a few days ago and noticed a weird issue with the cpu voltage in different programs.

My build:
Ryzen 5 1600
ASRock AB350 Pro4 (2.50 bios update)
Geforce GTX 1050 ti
Corsair Vengeance 16gb 3200MHz (at 2933MHz as motherboard does not support 3200)
Corsair TX650 power supply

This is what I am seeing: https://i.imgur.com/xuTtgsn.jpg

Now, there are a lot of things in HWMonitor under the Voltage section that I am not 100% sure about. So if there is an issue there, please let me know, I would greatly appreciate that. Ryzen Master, the ASRock utility and the Bios say the voltage is at 1.21, but HWMonitor and CPU-Z are saying otherwise. I am not crashing or having any problems with my build. I am just really concerned with the discrepancy in the programs, especially since I have seen youtube videos that do not have this problem in their programs.

EDIT: I forgot to mention that the core voltage in CPU-Z and HWMonitor is changing every few seconds, where in Ryzen Master it isn't moving a lot, if ever. This happens when I try overclocking and at stock. the voltage goes down a little at stock, but is still around 2.2 voltage in cpu-z
Please help!!

 

[sm625]

Well I think we can safely say that it isnt running at 2.2V or even 1.55V. Wait for new versions of those programs.

 

[yendor]

hw monitor and cpu-z in those versions are adding soc voltage and vcore. Same authors. Already know of issue. Worry not, you are at the voltage for vcore shown by ryzen master.

 

[Ketchup]

FWIW, AMD systens have had issues for years showing correct temp and voltage numbers in different programs. I even made a thread about it a few years ago. I hope newer software helps, but don't worry too much if it doesn't. The software from Asrock may be your best shot here.

 

[VirtualLarry]

We have similar builds. I built my rig yesterday.

AMD Ryzen 5 1600
ASRock AB350M Pro4 (I have the micro-ATX version)
2x8GB DDR4-2400 Team Dark (I have these running at 2667 @ 1.300V VDIMM)
AZZA mid-tower ATX case
ThermalTake TR2-430 ATX PSU
Adata SP550 240GB SATA6G 2.5" SSD
Gigabyte GTX1050ti 4GB

connected to a 4K UHD TV via HDMI2.0.

Anyways, I was using CPU-Z and Ryzen Master (downloaded yesterday), and the UEFI for OCing.

I downloaded HWMonitor today, and it shows my VCORE, approx DOUBLE what the other programs show.

I think (hope!) that HWMonitor is wrong, and I'm not giving my Ryzen 5 1600 CPU 2.9V+ of VCORE. That would be... bad.

I am having temp problems overclocking with the stock Wraith Spire cooler included. I re-mounted, and re-pasted with MX-4, still issues with temps.

Of course, I'm putting a 10-thread BOINC load on it.

So, now, I'm back at stock.

HWMonitor reports package power draw at 65-66W. Package temp 70C.