Hi All,
My system is running ok, but I'm not sure if my settings are ok. Is there anything else I can change? Can someone help me optimize it? And someone told me that i need to tighten my ram timings how do i do that
I have:
Athlon 64 3400+, DFI LanParty UT nF3 250GB, 2x 512GB Corsair (2.5) PC3200.
Here is what I have now:
FSB Bus Frequency: 244
AGP Bus Frequency: 67
LDT/FSB Frequency Ratio: 3
CPU/FSB Frequency Ratio: 10
CPU VID Control: 1.425
CPU VID Special Control: 110%
Chipset Voltage Control: 1.7
AGP Voltage Control: 1.6
DRAM Voltage Control: 2.8
DRAM Frequency Set: 180 (9/10)
CPC: Disabled
tCL: 3
tRCD: 4
tRAS: 10
tRP: 4
tRC: 15
tRFC: 17
tRRD: 00
tWR: 3
tWTR: 2
tRTW: 4
tREF: 4708 166 (1.95us)
tWCL: Auto
DQS Skew: Increase
DQS Skew Value: 64
DRAM Drive Strength: Level 1
Max Async Latency: 8
Read Preamble Time: 6
Idle Cycle Limit: 32
Dynamic Counter: Auto
R/W Queue Bypass: 16
Bypass Max: 4
32 Byte Granulation: Enable (4burst)
Thank you in advance for your help
My system is running ok, but I'm not sure if my settings are ok. Is there anything else I can change? Can someone help me optimize it? And someone told me that i need to tighten my ram timings how do i do that
I have:
Athlon 64 3400+, DFI LanParty UT nF3 250GB, 2x 512GB Corsair (2.5) PC3200.
Here is what I have now:
FSB Bus Frequency: 244
AGP Bus Frequency: 67
LDT/FSB Frequency Ratio: 3
CPU/FSB Frequency Ratio: 10
CPU VID Control: 1.425
CPU VID Special Control: 110%
Chipset Voltage Control: 1.7
AGP Voltage Control: 1.6
DRAM Voltage Control: 2.8
DRAM Frequency Set: 180 (9/10)
CPC: Disabled
tCL: 3
tRCD: 4
tRAS: 10
tRP: 4
tRC: 15
tRFC: 17
tRRD: 00
tWR: 3
tWTR: 2
tRTW: 4
tREF: 4708 166 (1.95us)
tWCL: Auto
DQS Skew: Increase
DQS Skew Value: 64
DRAM Drive Strength: Level 1
Max Async Latency: 8
Read Preamble Time: 6
Idle Cycle Limit: 32
Dynamic Counter: Auto
R/W Queue Bypass: 16
Bypass Max: 4
32 Byte Granulation: Enable (4burst)
Thank you in advance for your help
Facebook
Twitter