Need some help with setigate.

[cobraICE]

Hello, AT dudes
I need some help with my setigate I crunch right now for my own account.......
But if i wanna flush my results into a other account they still going to my own account why??
I have seen that setigate use a ID number, well i made a new account like cobra@linuxfreaks.nu
and i see that setigate give's this account another ID.
Well This is how a setigate result looks like :

operation=send_result_get_user_stats
user_id=1219331 ((((((((((((((((((((((((((((((((((( I PUT HERE THEW NEW CODE FOR TA_Seti2001@yahoo.com))))))))))))))))))))))))
user_key=1476339717 (((( DONT KNOW DO I NEED TO CHANGE THIS TO ????))))))))
major_version=3
minor_version=3
platform=i386-winnt-cmdline
cpu_type=Intel Pentium
system=Windows NT: 4.0
id=6ff0c724
key0=33c462a6
key1=3eefcafe
end_request_header
type=result
task=seti
version=256
name=16mr01ab.23627.20386.317312.212
user_id=1219331
cpu_time=33995.172658
status=0
params_index=0
key2=6a150966
key3=4fe0e57e
wu_key=372f9a04
end_header
data_type=encoded
data_class=0
splitter_version=0x0000
start_ra=15.551
start_dec= 10.97
end_ra=15.549
end_dec= 11.00
angle_range= 0.040
time_recorded= 2451985.87025 (Sat Mar 17 08:53:09 2001)
subband_center=1419574584.96
subband_base=1419570312.50
subband_sample_rate=9765.62
fft_len=2048
ifft_len=8
subband_number=212
receiver=ao1420
nsamples=1048576
tape_version=1.40
num_positions=22
coord0= 2451985.87025 15.551 10.97
coord1= 2451985.87031 15.551 10.97
coord2= 2451985.87037 15.551 10.97
coord3= 2451985.87043 15.551 10.97
coord4= 2451985.87049 15.551 10.98
coord5= 2451985.87054 15.551 10.98
coord6= 2451985.87060 15.551 10.98
coord7= 2451985.87066 15.551 10.98
coord8= 2451985.87072 15.551 10.98
coord9= 2451985.87078 15.550 10.98
coord10= 2451985.87083 15.550 10.98
coord11= 2451985.87089 15.550 10.99
coord12= 2451985.87095 15.550 10.99
coord13= 2451985.87101 15.550 10.99
coord14= 2451985.87106 15.550 10.99
coord15= 2451985.87112 15.550 10.99
coord16= 2451985.87118 15.550 10.99
coord17= 2451985.87124 15.550 10.99
coord18= 2451985.87130 15.550 10.99
coord19= 2451985.87135 15.550 11.00
coord20= 2451985.87141 15.550 11.00
coord21= 2451985.87147 15.549 11.00
end_seti_header
<ogh ncfft=10 cr=0.000000e+000 fl=128>
triplet: power=8.742888e+000 mean=7.730407e-003 period=2.164655e+001 ra=15.550 dec= 10.99 time= 2451985.87097 freq=1419573745.73 fft_len=128 chirp_rate=0.000000e+000
<ogt ncfft=10 cr=0.000000e+000 fl=128 cpu=103.518853>
<ogh ncfft=11 cr=0.000000e+000 fl=64>
pulse: power=2.000666e+000 mean=3.879546e-003 period=1.609319e+000 ra=15.550 dec= 10.99 time= 2451985.87087 freq=1419569854.74 fft_len=64 chirp_rate=0.000000e+000 snr=8.005327e+000 thresh=7.689837e+000 len_prof=245 prof=5044382a203c0621273f1c775c136c435532581e4647401c2b38003b544c454a263f3c3d3e341e395e5c222b3138446648553c562d606626373c1c425033383f414b2e5a2240033c233c4065474b32372e3e37522c283e09474e4e36265c3d46134b344f16595b433e32462d405c483b1d6b3b2131486d5c7e4b445a4b245526351b5640633825353b3b0f2f25331b352b4b31214a2b4e214b5719371c49411a49696030344c2211373b15262f402e37414c460e8726262531414d2f163a443e2a5755326d3a1938191976ff243530315736392b513a3045397f42423a3d482b2a4e40413550144045172a0c4c340e430f2c3e3923
<ogt ncfft=11 cr=0.000000e+000 fl=64 cpu=189.202059>
<ogh ncfft=12 cr=0.000000e+000 fl=32>
pulse: power=1.303561e+000 mean=1.960366e-003 period=1.895852e-001 ra=15.550 dec= 10.99 time= 2451985.87087 freq=1419570922.85 fft_len=32 chirp_rate=0.000000e+000 snr=6.868810e+000 thresh=6.175475e+000 len_prof=57 prof=444639466950204d503b450020fe34625037562e5d303b54824d7337684236313a6057063721534e4b42354a4e24474e522b4e4e2f3b2c4d4d
pulse: power=2.406423e+000 mean=1.953834e-003 period=2.391553e+000 ra=15.550 dec= 10.99 time= 2451985.87087 freq=1419574584.96 fft_len=32 chirp_rate=0.000000e+000 snr=8.895002e+000 thresh=8.479519e+000 len_prof=729 prof=
pulse: power=1.253340e+000 mean=1.941907e-003 period=1.630529e-001 ra=15.550 dec= 10.99 time= 2451985.87087 freq=1419577026.36 fft_len=32 chirp_rate=0.000000e+000 snr=6.409041e+000 thresh=6.072777e+000 len_prof=49 prof=3847503b285436573248296c233cff5937192c474125212e39795149085a4f4446436c1a002a2b7940146f3e2c2368483e
<ogt ncfft=12 cr=0.000000e+000 fl=32 cpu=355.270854>
<ogh ncfft=21186 cr=-7.490201e+000 fl=65536>
spike: power=9.595518e+001 ra=15.551 dec= 10.97 time= 2451985.87044 freq=1419578007.01 fft_len=65536 chirp_rate=-7.490201e+000
<ogt ncfft=21186 cr=-7.490201e+000 fl=65536 cpu=22925.525286>
<ogh ncfft=26220 cr=-1.447021e+001 fl=131072>
spike: power=1.778998e+002 ra=15.550 dec= 10.99 time= 2451985.87126 freq=1419571819.01 fft_len=131072 chirp_rate=-1.447021e+001
<ogt ncfft=26220 cr=-1.447021e+001 fl=131072 cpu=28296.999086>





Well it's a big list i hope someone can help me with this setigate problem......

Does someone have any Idea ?
Greetings...Cobra.

 

[Shuxclams]

<< user_key=1476339717 >>



Tim,
If that is your user user account that you currently have then its going to send all the completed Wu's to your 1476339717 account. Did you create a whole new user or just change email addresses?







SHUX

 

[IBhacknU]

more cowbell?

 

[Shuxclams]

http://www.xs4all.nl/~kyjoshi/seti/faq.htm Here is the SETIGATE manual, I am starting to read it now.










SHUX

 

[IBhacknU]

must have more bell!

 

[Shuxclams]

The first time you run it through SetiGate you will have to start it 'unhidden' so you can enter your seti@home account information.
Without this information the client won't be able to ask SetiGate for a work unit.

Another option: Did you set the client and SetiGate to communicate using the same port number? Check the SetiGate options (File -> Options), is 'Local port' the same number you use to start up the CLI client (File -> Text client info)?


Any help?









SHUX

 

[Shuxclams]

I think thats it Tim, open the CLI in the unhidden mode and put your email address in.








SHUX

 

[cobraICE]

Euhm the ID key AND user KEY is something i dint try....
But making a new user with email adress doesnt work because my clients are trying to connect my own email.
for example.:
1 have right now al the clients connected to cobra@linuxfreaks.nu (for example)
Now i want setigate flush under seti@linuxfreaks.nu right now if i do that all my clients dont connect anymore to setigate because he doenst know this user......
He's searching for cobra@linuxfreaks.nu
So... i have to change al the results .
But i dont know if this works.....gonna try tonight (time here is 12:27 ) so i'm @ wrok right now.
I'm not planning to change al my results..... gonna make a script i think who's doing this for me .
i let you guys know.....thanx ..

 

[Engineer]

Hmmmmmm....I see the e-mail that was created is at the SETI site, but when I try to open a new CLI and join it...the CLI just sits there as if the naming server for SETI is down. I verified this by trying to use my own account and the same thing.

I switched from the SETIQueue to direct Berkeley...still no go! I personally think there is something wrong with the joining / naming servers at this time

 

[serialb]

<<I switched from the SETIQueue to direct Berkeley...still no go! I personally think there is something wrong with the joining / naming servers at this time >>

Definitely... I has been taking a lot longer than "normal" for a week or so.

serialb

 

[Sukhoi]

I may have an idea here...the OLD SETIQ. It stores all the results much more simply, and I *think* it bases the user on whatever user_info.sah is in the SETIQ folder. So it might not matter which user_info.sah is on the crunching computers. See my thinking here?