• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Need OC Help plz!

D

ddasilva99

Member
I have a PIII 450Mhz CPU that I was to OC to 600Mhz with my Asus P3B Motherboard.

In the Jumperfree Bios it reads:

CPU CORE - 4.5x (fixed - cannot change)
CPU BUS/PCI Freq (MHZ) - 133.0/33.25 (That is the setting I put it to and it rebooted saying PIII 600B Mhz)
CPU CORE - 2.0v (Can be moved up by .05 increments)

What should my CPU BUS/CPU CORE be to achieve PIII600 OverClocking?
Are my setting right or do I need to change my CPU CORE UP and Move my CPU BUS DOWN TO 124.0/40.00

Thanks

PS!!! Is there anything I should Know about overclocking...do I need a special fan now or will the one with the chip do fine?
 
Your settings are fine! If you get unstable just up a little bit the VCore.
If you are running FSB 133.33 Mhz you got ur CPU @ 600 Mhz.
Just keep an eye on the temp, really well cooled CPU!

Raf
 
Thank you for answering me.

I was VERY unstable when I changed to 133.0...divide overflow error when it went into win98.

What should I set my Vcore to? (right now it is default at 2.0v can be changed every 0.05)
What is the ideal temp range...what is too hot and what is caution?

Thanks
Derek
 
Try to up to 2.10 V.
Just keep an eye on the temp.
I dunno what temp these processors can hit. Someone will help you with the temps.
I think a good HSF will do the job.

Raf
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top