Need imput on prime95 OC error

[Fallengod]

Ocing my 3200+ venice on my Epox 9npa+ mobo.

Ocing at 2.5ghz right now. I am at 1.55 volts right now. It was the same error with 1.5 volts. I just did 10x multi with 250 frequency. Ive tried it with HTT at 5x, 4x, and 3x. All similar errors. Memory is relaxed right now at SPD settings. Which is 3-3-3-9 2t right now at 2.7volts(to rule out memory problems. My memory is Corsair XMS 4400C2PT which is TCCD. So its not the memory...

What does this prime95 error refer to? CPU related? Voltage? Memory?

Test 1, 400 Lucas-Lehmer iterations of M11922945 using 1024K FFT Length.
FATAL ERROR: Rounding was 0.4999991484, Expected less than 0.4
Hardware failure detected, consult stress.txt file

 

[TecHNooB]

abandon ship :O

Clearly, ur OC didn't go well =) I hope that helps kakakaka

 

[stevty2889]

Well run memtest to see if it's the memory. You should have the HTT multi @4x at 250mhz, above that you need to go to 3x. If memtest passes, then it's your CPU overclock that isn't 100% stable, and thats most likely the case.