Need help with an older video card (gf3 ti200)...

[OoteR02]

My computer is being a real pain in my ass tonight, Here's the specs before i get into anything.

Windows XP
K7s5a
xp 2100+ paly
1 gig kingston 2700 ddr (infineon)
60 gig maxtor Master primary
CD RW Master, secondary.
2x WD SE 80 gig hdds on promise fasttrack 100
56k pci modem
floppy..

and an asus gf3 ti200 (8200 series) 64M DDR (AGP)

..

So, i get winxp loaded up, and everything is fine, sound works, the raid works, everything is great. Except my video card. It wont start (error 10). So, i still have a screen, but it wont be recognized as a gf3 ti200, i've tried the drivers that came with the card, and the 44.03 dets. No luck. still wont load the device correctly..

Any ideas? it worked fine til i installed the raid and and then xp on the raid.. i'm assuming its an irq conflict, but i cant figure out how to remedy it. I had a problem with a scsi card and the modem before, both wanted irq5 to themselves, so i just took out the scsi..

 

[cubanx]

Does Device manager have either device marked as a problem?
In the Bios do you let the MOBO handle IRQ's or use the "PNP OS Installed" option?

 

[OoteR02]

i have pnp OS installed set.

And it just says "the device cannot start"

when i put allocate irq to pci vga adaptor to enabled, it works, but then windows has a problem with rundll...