• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Need help setting WDNS with tomato firmware. [Solved]

C

ChaoZ

Diamond Member
I followed this guide. I couldn't obtain the IP, because I think I set my SSID incorrectly.

Now I can't access the firmware page of the node. I used the normal 192.168.1.1 and tried 192.168.1.2; neither works. What should I do? A hard reset?
 
Last edited:
You should still be able to access the router's menu pages, using its LAN IP. However, the secondary WDS router generally has DHCP disabled (gets it from primary router), so if you were trying to configure the secondary router, you must first set a static IP on your PC to something on the same subnet.
 
Yes, go to your network card settings, under the IPv4 settings, change it from automatic, to specify a setting, use something like 192.168.1.11 / subnet mask 255.255.255.0 .
If your routers are on a different subnet 192.168.x.1, then change it appropriately.
 
Ok, I think I set it up correctly this time. On my smartphone I can see that the signal is greatly increased, however, I'm stuck at obtaining IP address.

Edit: Working now. Didn't know I had to connect to the primary router first.
 
Last edited:
You must log in or register to reply here.

TRENDING THREADS

Back
Top