Need help, pls read..

Dragonfly

Member
Jun 3, 2001
57
0
0
I know it's the wrong forum, but please help me..
My Cpu is a TB 1,2 GHz. I have a ASUS A7V133 motherboard, and 512 PQI PC133 RAM.
My cpu will get around 60-62c hot, when i run 3dmark 2001 (which i think uses the cpu, but i could be wrong ?).
Anyway it runs fine at 12x100, but if i set the fsb to 133, it freezes all the time. EVEN if i only run it at 6x133...
But i've noticed something in my bios, this is the config of the RAM, which i think is wrong for 133 RAM (7,5ns). So please tell me what values these should have:
CAS latency
RAS precharge
RAS to CAS Delay

As it is now it's:

CAS latency=3t
RAS precharge=2t
RAS to CAS Delay=2t

I think "RAS precharge" and "RAS to CAS delay", ought to be 3t, isn't this right ?

many thanks in advance for any help
 

Jennifer66

Senior member
Jun 30, 2001
217
0
0
Its a slower setting than 3-2-2 but if your having a problem setting it to 3-3-3 to see if thats the cause wont hurt anything.
 

RealGun

Member
Jul 23, 2001
88
0
0
Get you self a better heatsink you should be running 50C or less when trying to overclock the CPU.
Try the Gladiator and heavy fan (Delta) or An Sk6 and a slight slower yet a lot softer fan.