NEED HELP PLEASE ANYBODY !!!

Toggle sidebar Toggle sidebar
L

lillazy23

Banned
Feb 16, 2001
149
0
0
hey guys I need help getting this problem fixed. I have tried everything but cant figure out problem. First of all heres the components to my pc

AMD 1.2
Asus A7V133
Asus Geforce GTS2 deluxe
256mb crucial ram
Quantum 40gb ata100
SB x-gamer

Ok the problem starts when im playing a game, about 10 minutes into counterstrike all of a sudden the game freezes and the sound keeps looping. So far I have updated bios to 1004, installed latest promise drivers, installed via 4in1 4.29v driver, installed detenator 3 drivers. But I still keep freezing for some reason. I tried formatting and doing a clean install but im still getting same thing. I have tried uninstalling via and promise drivers thinking maybe that was the problem but still nothing. I even tried uninstalling detenator3 and using asus7700 graphics driver. I dont think its a heat problem, im using FOP32-1 with arctic silver compound and temp is idle at 50c. Any help is greatly appreciated

THANK YOU VERY MUCH

update

so far I have tried everything I have think of and still getting same thing.

tried sound card in every pci slot
changed agp to 2x and 1x
changed agp apeture size to 32 (i think i spelled that wrong)
reinstalled via drivers, tried 4.28 and 4.29
reinstalled promise driver
formated again
updated sound card drivers
changed primary vga to AGP instead of PCI


I dont think its a heat problem since smart doctor is telling me the card is fine. This problem is really starting to piss me off. Sometimes it takes longer to freeze then before 10-20 min. Im thinking of only one thing i could do and thats to flash the bios to a older version, Im currently on 1004. Anybody think that would help????
btw the system isnt overclocked and is running under WIN98SE

:(
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
List your irq settings...Seems like a hardware conflict...

I agree the heat seems on target for that board...
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
No...I mean give me a list of irq addresses and the devices that are using them...


Go to control panel, system, device manager, highlight computer, click properties...read that list.
 
L

lillazy23

Banned
Feb 16, 2001
149
0
0
ok
00 system timer
01 standard 101/102 microsoft natural keyboard
02 programmable interrupt controller
03 communications port (com2)
04 communications port (com1)
05 kingston ethrx pci 10/100 fast ethernet adapter
05 creative sb live! series
05 via tech 3038 pci to usb universal host controller
05 via tech 3038 pci to usb universal host controller
05 acpi irq holder pci irq steering
06 standard floppy disk controller
07 ecp printer port
08 sytem cmos/real time clock
09 sci irq used by acpi bus
10 acpi irq holder for pci irq steering
11 nvidia geforce2 gts/geforce2 pro
11 acpi irq holder for pci irq steering
12 standard ps/2 port mouse
13 numeric data processor
14 via bus master pci ide controller
14 primary ide controller (dual fifo)
15 via bus master pci ide controller
15 secondary ide controller (dual fifo)

hope that helps
thanks
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
There is the problem I think...SBlive does not like to share...Your usb controller is loading up in irq5 with it....go into bios and tell it where to load usb (if that is the option)...In my mobo I had to tell the bios not to asign them that I would and that way I was able to isolate and direct placement.

Do you use both com ports...most don't, got a ps2 mouse, most likely...disable com ports it will free two extra irq's...get that ethernet card to load in its place.

In summary SBLive wants to have its own address...make sure nothing else shares its place.
 
S

SMK

Member
Mar 9, 2001
43
0
0
I had a similar problem on old computer I had, would freeze at desktop though. Moved sb live to irq 10 and that solved the problem. Also there's bios 1007 for your board. Won't fix problem, but did fix something about the promise controllers, and I noticed you said you had one.

http://www.asus.com.tw/products/motherboard/bios_socka.html#a7v

Also in bios it should have option to assign irq for your pci slots. Forgot exactly what it says, but that's how I fixed my problem. Find which slot it's in then disable it in the bios. You can then go into device manager and manually assign irq10.
 
L

lillazy23

Banned
Feb 16, 2001
149
0
0
can you please tell me how to reassign irq ports. Also Im using a Microsoft Explorer mouse with teh USB port.
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
I agree irq 10 is free and probably easier to move to then other idea...however look into other comments...It is definitely a hardware conflict with the soundcard.
 
S

SMK

Member
Mar 9, 2001
43
0
0
Try going into the bios, then go to PNP/PCI configuration. It should list something like this

Slot 1 Use Irq: Auto
Slot 2 Use Irq: Auto
Slot 3 Use Irq: Auto
and so on....

Find which slot it's in then go to that slot, and change Auto to 10. Save and exit, then see if it lists irq10 for your sound card in device manager. If it does then play the game again and see if it persists.
 
L

lillazy23

Banned
Feb 16, 2001
149
0
0
ok i just changed pci slot to 3 and this is what im getting now. 00 system timer


00 system timer
01 standard 101/102 microsoft natural keyboard
02 programmable interrupt controller
03 communications port (com2)
04 communications port (com1)
05 Creative SB Live! Series
05 ACPI IRQ holder for PCI IRQ steering
06 standard floppy disk controller
07 ecp printer port (lpt1)
08 system cmos/real time clock
09 kingston etherx pci 10/100 fast ethernet adapter
09 via tech 3038 pci to USB universal host controller
09 via tech 3038 pci to USB universal host controller
09 acpi irq holder for pci irq steering
09 sci irq used by acpi bus
10 win95-98 promise ultra100 ide controller
10 acpi irq holder for pci irq steering
11 nvidia geforce2 gts/geforce2 pro
11 acpi irq holder for pci irq steering
12 standard ps/2 port mouse
13 numeric data processor
14 via bus master pci ide controller
14 primary ide controller (dual fifo)
15 via bus master pci ide controller
15 secondary ide controller (dual fifo)

does this look ok now??? also i see that the NIC card is still using a IRQ with the USB controller on port 9 is this fine?? or which port can i assign the NIC card to??? also i noticed that the promise ata100 driver showed up this time. one more thing isnt the 1007 bios for the a7v mobo?? will it work with a7v133??

thanks guys







 
L

lillazy23

Banned
Feb 16, 2001
149
0
0
ill test it out right now, ill reply with results thanks. Also will the 1007 bios work with my a7v133?
 
L

lillazy23

Banned
Feb 16, 2001
149
0
0
another problem emerged now. The USB mouse i have wont turn on when windows starts. I have to disconnect it and plug in it again. I think its the IRQ problem with the NIC card, can one of you guys please help me assign the NIC card to another irq or the usb controller.

thank you
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
Go into bios and where serial ports are (I think peripherals) they are enabled just disable them...If you just remove it in windows it will redetect it each time.

Do same as befor find slot the nic card is in and switch from auto to irq 4 or 3...should work. My modem is on irq 3 after I disabled the ports.
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
Did it all work!!! Problems solved? Kick a** setup smokin?

I see you became a member during this post....

 
L

lillazy23

Banned
Feb 16, 2001
149
0
0
hehe yeah everything works perfect now except this usb controller. Ok I assigned NIC card to irq4 but the USB controllers moved with it too. How can i assign the USB controllers to another IRQ.

thanks again
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
In my bios I can auto assign the usb controllers to a particular irq...If not try to do it in windows system device manager...go to settings and try to change irq...then reboot if it comes back up in the same irq as before the change then the bios is definitely assigning it...you will have to turn that off or in my case as listed above I had to tell bios in one of the submenus that I the user will assign the irqs (obviously not same wording).


I had my usb sharing an irq at first and it didn't cause a problem...however it was not a mouse...I have heard of a usb update fix through microsuck that is supposed to correct bug with via chipsets that effects some sort of timing issue...dunno for sure. Did you have problems when it was sharing with sound card and nic card? Very odd.
 
D

Duvie

Elite Member
Feb 5, 2001
16,215
0
71
Well I couldn't change mine in windows, but that may be because I assigned it in bios...try it though and if it tells you no then you know bios has something to override it.


Go to control panel...system...device manager...highlight the via usb universal host controller...click properties...click resources tab...uncheck automatic setting...highlight irq...click change settings
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom