Need help overclock venice!!!!!!!!!!!

[Hellotalkie]

Ok since this is my first overclock i have been reading for hours. So i understand it. I go into the bios and put the muliplier at x10 2000. I raise the fsb by 5. Now when i raise it to around 115. It shows the start up screen where it checks teh memory etc and then it stops after it says press the del if u would like to skip the oc and go to bios.. or something like that. It should be checking the the drives but it doesnt. Instead it restarts it self and then finds the drives and gets into windows. I havent raised the voltage yet and still 1.4. What should i do. Right now i can boot at 235 and sometimes can boot. If i turn off my pc for a moment it works and heat is not a issue. 30c with door off

 

[Hellotalkie]

Also if anybody owns a gigabytepro sli could u tell me how to oc the ram. cant seem to find settings. Also i overclocked and some reason my wireless adapter stopped working?

 

[Dweekie]

I really like this guide, best step by step directions for a newbie that i ever ran into. Good for experienced too, since it seems to consolidate so much information in such a nice, detailed way. I can guess a lot of things you might have not set, but you'll find out once you start doing the steps in this guide.

http://hardforum.com/showthread.php?t=888001&highlight=overclocking+guide

 

[Hellotalkie]

camon guys when i get past 217 now sometimes i get pased teh bios screen and sometimes it restarts it self. I dont know what to do. I thought venice cores oc good and probably my fault. I dont know sometimes when i was up to 230 when i press del the bios would appear but freeze

 

[Ricemarine]

Just maybe you should post your computer parts.

 

[win32asmguy]

Set your HT Multiplier to 1x. It won't work otherwise.

edit: Regarding the ram, please hold the Control key and F1 at the same time as soon as you enter the bios screen. This should cause the memory timing options to appear. Good luck!

 

[Hellotalkie]

amd64 3200+
2gb corsair value select 512x4
7800gt
gigabyteprosli


Also i should set my HT multiplier to 1x?

 

[Hellotalkie]

is the ht frequency ht link multi?

 

[Hellotalkie]

i cant get passed 215

 

[potato28]

Its the board itself. Same board, and it has problems at 220 for me. Also try lowering ur RAM speeds from 200 to 166 or 133. And try to get the amount of RAM to 2 sticks. AMD is not very good at 2T command rate...

 

[win32asmguy]

If you set your HT Link Multiplier to 1x (instead of 3x or 4x you would normally use for overclocking) then the IDE detection and reboot issue will go away. I was able to get my K8N-SLI up to 335fsb/htt. Keep in mind that the HT Link Multiplier option might only show up in the M.I.T. menu if you hold Control + F1 at the main bios screen on bootup. I think bios F5 didn't require it for my board, though.