• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Need Correct Voltage for 1.2ghtz Thunderbird

G

ginky4

Member
Does anybody know what the correct voltage for a 1.2ghtz Thunderbird processor should be? I have a KT7 Raid motherboard and I had to use the User Define to set my processor speed. My bios detected my processor speed as 600 instead of 1200 so I had to set my Multiplier to 12. Now my processor is recognized as a 1200. What should the voltage be set to?
 
I am having a crazy problem. I have an Abit KT7 Raid motherboard that is brand new. I just assembled it. My hard drives are on IDE3 and IDE4. I have Raid 1 enabled in my bios. For some reason I can't get Windows to load onto this system. The bios auto detected my processor speed as 600ghtz instead of 1200. So I had to go into User Define and set my Multiplier to 12. Now the processor speed is detected correctly. This is a long shot but I was thinking maybe the voltage had something to do with my computer locking up when I try to install Windows. Any ideas?
 
try updating the bios. abit has come out with a lot of those lately, should probably recognize your t bird correctly
 
Ginky4, you need to load your system on the onboard IDE controller before using the RAID controller. It will load the drivers for the RAID, then you can switch it back to your current config.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top