need a OC expert

[MichaelMuck]

as you can see from my sig had my cpu at 10.5x210. now I have it running for a few hours at 11x210 (2320 mhz) at 1.9v with temps at 35c idle , 40c load stable (ran prime95 for a few hours). tested my ddr with memtest for a while and stable at 210 at 4-2-2-2. To go higher should I lower my fsb and raise my multpy or just lower my ddr setting and raise my fsb and/or change aggressive setting to optimal in bios?. also is it safe to raise my volts more?. only plan to have chip for yr max.

PS: removed nb hs and added as3. Also have side case door fan (120mm 129cfm 44dba) centered above my video card, cools nb,vc,sb

 

[ChampionAtTufshop]

lower ddr timings and raise fsb as high as you can go

i havnt seen any sudden tbred death syndrome associated with high voltages such as northwoods, but for a .13 cpu thats already pretty high
i would not go any higher, but if its only being kept for a yr max why not lol

 

[Vape]

go the water cooling for sure if you wanna go higher safely... maybe every now and then stick some ice cubes in the tub to cool down the water more.

lower ddr and raise the fsb... no point making the exhaust pipe smaller and increasing the intake on the engine...