My overclock Abit IP35 Pro / E6600

[Flessan]

Handles 8X425 no problem for 3.4 gHz. I tried lower multipliers with higher FSB's but was having trouble above 470. Could be the RAM, but it is Crucial Ballistix PC6400.

30+ Minutes on Prime95 (Orthos) with no errors.

I'll update again soon, but work keeps me busy 🙂.

 

[undeclared]

hehe 30+ hours is good!

30+ minutes doesn't really test jack =/

Although, 30 minutes does at least mean its stable enough (ex, some will crash within 2-3 minutes or even 30 seconds.. so)

 

[Flessan]

Sorry...didn't mean to mislead you. I should have said "and still running". When I got up this morning, it was up to 9 hours, and still going 🙂.

 

[Flessan]

Ok. 18 hours 45 minutes without a crash. Good enough for me. Will try some superpi I guess.

 

[Pharmdeity]

Can you clarify a couple of things for me?

1. Was the 18 hours at 8x425 or at some other speed?

2. Has this cpu gone faster in other boards or is it new to you?

Thanks,

Pharmdeity

 

[Flessan]

Yes, 18 hours at 8x425, and it's a new CPU. Here are some CPUZ images.

CPUZ-SPD

CPUZ-Memory

CPUZ-Mainboard

CPUZ-CPU

Hope those links work 🙂.

I've been running Orthos again, but only for about an hour and a half now. Just did it to get a screens hot, should have taken it before closing it the first time 🙂.

Orthos

I noticed that Orthos doesn't get the CPU speed right, and CPUZ doesn't get the vcore voltage right.

Vcore is at 1.4V, and CPU is at 3.2gHz