My O/C-ing Goal Finally Accomplished! hehehe

[BuckMaster]

Soltek SL-75FRN2
Barton 2500@3200 (SK-7 AS III) 34C idle
11X200FSB (400FSB)
ATI 9700 Pro (Stock)
Corsair 2-256 XMS 3200 (Vdimm 2.8) Key factor going from 190FSB to 200FSB!

Cpu-Z version 1.16.
Cpu Name AMD Athlon XP (Barton)
Specification AMD Athlon(tm) XP 3200+
Family / Model / Stepping 6 A 0
Extended Family / Model 7 A
Package Socket A
Technology 0.13µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
Cpu Clock 2204.9 MHz
Clock multiplier x 11.0
Front Side Bus Frequency 200.4 MHz
Bus Speed 400.9 MHz
L1 Data Cache 64 Kbytes, 2-way set associative, 64 bytes line size
L1 Instruction Cache 64 Kbytes, 2-way set associative, 64 bytes line size
L2 Cache 512 Kbytes, 16-way set associative, 64 bytes line size
L2 Speed 2204.9 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits

Motherboard manufacturer
Motherboard model nVidia-nForce2,
BIOS vendor Phoenix Technologies, LTD
BIOS revision 6.00 PG
BIOS release date 08/14/2003
Chipset nVidia nForce2 rev. C1
Southbridge nVidia MCP-T rev. A3
Sensor chip Winbond W83627HF


RAM Type DDR-SDRAM
RAM Size 512 Mb
Hope to get these stats a tad lower!
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 8 clocks


3DMark Pro
3DMark Score 4782 3DMarks Game Tests
GT1 - Wings of Fury 175.2 fps Game Tests
GT2 - Battle of Proxycon 30.4 fps Game Tests
GT3 - Troll's Lair 28.3 fps Game Tests
GT4 - Mother Nature 27.1 fps Game Tests
CPU Score 690 CPUMarks CPU Tests
CPU Test 1 76.5 fps CPU Tests
CPU Test 2 12.4 fps CPU Tests

Prime95
Memtest
Both stable after 1 hour of each!

Also I cant say thanks enough for eveyones help and a few guys in general that helped me reach my goal!
DAPUNISHER,bjc112 and NEWKILLA for this support!

 

[Excelsior]

What are you using to read those temps?

 

[Corporate Thug]

unless you live in antarctica, those temps are wrong

 

[BuckMaster]

Sandra Soft 2003 and the BIOS! Believe it or not they both matched up. I ran 3DMark03 for 60 minutes in a loop. After it ran and maybe 5 minutes is when I checked the temp. So either it dropped alot within 5 minutes after running it or maybe BOTH sandra and my BIOS is wrong regurdless I know for a FACT! its running 5-8 degrees cooler then my previous XP2100@12 or it was 12.5@ 166FSB=2.2! Why because i used the same version of Sandra and used the BIOS on my previous CPU. Regurdless Im happy so please give me some slack! If it makes you happy its running at 95C!
hehehe


BTW..If you know of another good program to run Ill test it again. Just LMK know. Hell maybe my eyes are starting to go with my old age!

Also it now seems to be idleing at 34C. So we know 36C underload wont be right so ill edit my post. Sorry!

 

[Twista]

yes we all know "!some boards read temps to low!"

 

[DAPUNISHER]

Download and use the Soltek hardware monitor 2.05 as it gives the core temp via the absII setting. Also, if I remember correctly you have the system in your basement where it's only like 70f right?

BTW, congrats on breaking the 3200+ barrier :beer:

 

[NEWKILLA]

congratulations my brotha


dam not 1 but 2 soltek success stories in 1 day

gotta give big props to dapunisher for egging me on earlier

it was like having my own cheerleading squad,

and to buck for HOOKIN THE KILLAAAAA UP with some floppy lovin

and my temps are the same--if i fire up the game server they spike abit--but then settle back down

to @35-37C--coolermaster-X adjustable 80mm with a 120mm side fan(off) if i put it on drops to 32

but its more for my video,

thanks guys

Dave

 

[Excelsior]

Yeah, I also have to thank Dapunisher. I got the Soltek 75FRN2 because of him. It is serving me very well as we speak. Running modded 1.3 bios, 1700+ @ 2333Mhz.

 

[DAPUNISHER]

No problemo gentlemen It's great to see others having as much fun as myself overclocking the Soltek Golden Flame series boards :beer: If Soltek would just expand their line to include feature packed boards for both AMD&Intel, add the mounting holes around the socket, and provide a bit higher voltages *especially vDIMM* they'd really increase their market share here in North America.

 

[NEWKILLA]

man i almost smoked the whole shebang

i went for 220-don t ask why but im back at 200


KILLLLLLAAAAAAA

 

[BuckMaster]

Since Im stable at 11X@200FSB anyne think its safe to try more FSB or upping the mulipier now?

 

[NEWKILLA]

i went for the motherload but i think 210 is do-able

im gonna try a lil now


**K***