My new cows!

[micron]

I have two new cows to add to my herd:
PIII 450
K6-2 380

So now my herd consists of:
PIII 450
Celeron 333
K6-2 380
Pentium 200MMX
Pentium 133MMX

Total MHZ:1496 🙂

 

[divide by zero]

Way to go, Micron!! Woomoo! The more to put the "hertz"-ing on the DPC!

 

[MaJik]

O/C the Cely 333 and P3 450 =-)

 

[dennilfloss]

Way to go! 🙂

All we need is for every active member to get a couple more cows and the DPC can kiss our Collective you-know-whats. 😉

 

[micron]

My PIII 450 is on an Asus P3B-F how can I OC it?

 

[micron]

I can't OC the Celeron because it's on an LX mobo.

 

[blade47]

Does the Lx board not have a 75mhz fsb? Or do you just not want to run the pci & agp bus out of spec? If that's the case you won't be able to overclock the bx board either without overclocking the pci & agp buses.

 

[micron]

My LX mobo only has 66MHZ bus.

 

[blade47]

You'll need to increase the fsb. You'll have to check, I don't know if the P3b-f's had jumpers or if the fsb is set in the bios on those boards. Start out with say 103mhz fsb then work your way up until you start to have instability problems. You'll know when you've pushed it too high.🙂

 

[GSmith]

The P3BF's fsb can be changed in the BIOS or with dip switches on the board.

 

[cory]

i have about 7 of the p3bf motherboards
and they overclock very well.

running several at 150mhz bus