My gskill hzs wouldnt do 1t am i to blame??

[wordy777]

:thumbsdown:I bought these thinking they could do 1t cuz the reviews said they could, but they didnt on my Epox 9n1+ anyone know why?

 

[Avalon]

Are you using all your RAM slots?

 

[atybimf]

Are you talking about 2x1GB sticks? If so, that's weird..

 

[TrevorRC]

Also, 1T is irrelevant.

If you're using 4x1GB sticks, 2T is more than adequate.

 

[Elfear]

Mine will do 275MHz with a 1T command rate. Sounds like your board might not like the sticks or you need to mess with the settings some more.

 

[buzzsaw13]

Mines can't do 1T timings but I dont really care.

 

[5t3v0]

Mine wont do high overclock speeds, but they will do 1T at any stable speed, & tighter timings at my chosen speed of 229MHz. What voltage are you using? They dont like much these HZs. I started off on Auto (2.75v) but got better stability on 2.6v. Here's all the timings I have set if its any help:

CPU Frequency = 280
CPU Multiplier = 9
DRAM Divider = 166 (5:6)
DRAM Frequency = 229
CPU voltage = 1.55v
DRAM voltage = 2.6v
Chipset voltage = 1.5v
Command Per Clock (CPC) = 1T
CAS Latency Control (Tcl) = 3
RAS# to CAS# delay (Trcd) = 3T
Min RAS# active time (Tras) = 6T
Row precharge time (Trp) = 3T
Row Cycle time (Trc) = 7T
Row refresh cyc time (Trfc) = 13T
Row to Row delay (Trrd) = 2T
Write recovery time (Twr) = 2T
Write to Read delay (Twtr) = 1T
Read to Write delay (Trwt) = 3T
Refresh Period (Tref) = 7.8µs
R/W Queue Bypass = 16
Bypass Max = 7
32 Byte Granularity = Disable
DQS Skew Control = Disable
DQS Skew Value = 0
Read Preamble Time = 5.0ns
IdleCycle Limit = 16T
Max Async Latency = 7.0ns
Dynamic Counter = Enable

 

[wordy777]

Im using two one gig sticks bought from newegg just two weeks ago, ram does close to 300 but wont do 1t at any speed, so i sent it back, all the reviews, including on the gskill web site listed it as running 1t command rate. I used all voltages up to 2.85 but no 1t.

 

[Stoneburner]

I just got mine and threw them in. First I tried 3-4-4-8 at 1t, did not boot propery into windows lowered to 2t, booted fine. Then i changed to 3-5-5-10 and 1t and its working currently, obviously have many stress tests that need some running. And i'm going to try lowering voltage.

 

[Stoneburner]

Having some pretty bad luck with mine as well. Keep getting restarts and crashes at 1t. and this is only at 240mhz. I really need a new mobo, this a8r-mvp is just not playing nice with any ram.

 

[TrevorRC]

Originally posted by: Elfear
Mine will do 275MHz with a 1T command rate. Sounds like your board might not like the sticks or you need to mess with the settings some more.

Same here.

275 Mhz @ 3-4-4-8 1T Primes 24/7.
--Trevor