My A7V133 + 1.2 T-bird ... SiSoft Sandra says out of spec !?! + Data corruption

[technodave]

Can someone enlighten me here ... I have the proc. at 9x133. Not overclocked or anything.
It says the following

PCI = 45mhz (1/3 divider) Warning W2520. Says to reduce multiplier
AGP = 90mhz Warning W2521
ISA = 11mhz
DMA = 6mhz Warning W2526 Says all these are too high.

I have been having trouble keeping the board cool (its always around 51-55C reported in the BIOS ... Asus probe says 61-65C. I know the BIOS is the accurate one. My video card is an Abit siluro MX400 w/ 64mb. I run my two IBM hdds off the Promise 100 controller and have been having some probelms with data corruption for some reason. Not sure why. Can hard drive tempurature attribute to this??

Also, it says: System BIOS : SMBIOS/DMI information may be inaccurate.

Any pointers here?? Im wondering if this out-of-spec stuff is why its running so hot and having data corruption .... Thanks in advance!!

 

[technodave]

Update:

I changed my multiplier from 9x133 to 12x100 and it cleared the out-of-spec problems from Sandra. Is there a place to change multipliers or something ???

Still getting the SMBIOS/DMI inaccurate data tho ... am going to see if my temps come down now.


TIA!!!