My 2400c is oc'd to 3330c -275 mhz fsb Update: now 3360c 280 mhz!!

[FelixDeCat]

SL6Z3, default voltage, 444 4/5.

The temp is 40c, sp34.

Update: Swtiched mobos from an 875 Epox to an 865 MSI Neo2 PLS and was able to run it at 285 fsb @ 3420, temp is 45c, 456 4/5

Edit 2: GTA/Vice City was locking up so I upped voltage to 1.65v.

Edit 3: GTA too unstable - clocking back down to 280fsb 3360mhz, 1.55v

 

[zodder]

Sweet!

 

[Thor86]

Nice chip. Your PC4000 can't run 1:1 ratios?

 

[FelixDeCat]

Originally posted by: Thor86
Nice chip. Your PC4000 can't run 1:1 ratios?

Im not sure what it was. I was running 250 1:1 500, 266 1:1 532 but it wouldnt go 275 1:1 550!!

Im currently using stock vdim volt of 2.5. It didnt help to even go up to 2.8. Doesnt matter b/c Im happy.:lips:

 

[smahoney]

Almost none of the PC4000 will run 1:1 at 275. Any that pass are usually sold as PC4200, PC4300 or PC4400.

 

[FelixDeCat]

New mobo = better results!

 

[zodder]

That's the same board I have, so maybe I'll jack up my 2.6 a little bit more and see what happens.

 

[myocardia]

Felix, no offense to you, bub, but a 2400 is an AMD chip. What you have is a 2.4C.

 

[InlineFive]

Originally posted by: myocardia
Felix, no offense to you, bub, but a 2400 is an AMD chip. What you have is a 2.4C.

Notice in the title where it says 2400C. Not to mention that any experienced hardware person would know off the bat that it's Intel because no Athlon hsa a clock speed of 2.4Ghz or has an overclock of 1Ghz!

-Por

 

[FelixDeCat]

Originally posted by: myocardia
Felix, no offense to you, bub, but a 2400 is an AMD chip. What you have is a 2.4C.

None taken!

While I know AMD exists - its not in my universe - so I dont know about it those "pr" numbers! And no intent was made to mymic them. I just wanted to illustrate the numbers a little.

IN ADDITION - I just started using Sandra last night. I dont have it right in front of me but I could have sworn that it my o/c'd system was comparable to a PR4400 rating.

 

[gwag]

Originally posted by: PorBleemo

Originally posted by: myocardia
Felix, no offense to you, bub, but a 2400 is an AMD chip. What you have is a 2.4C.

Notice in the title where it says 2400C. Not to mention that any experienced hardware person would know off the bat that it's Intel because no Athlon hsa a clock speed of 2.4Ghz or has an overclock of 1Ghz!

-Por

I have a 1700 xp 1466mhz running 2520mhz thats a 1Ghz overclock.

 

[Lyfer]

Originally posted by: zodder
Sweet!

Indeed, on a MSI board too! (now thats news)

 

[FelixDeCat]

Originally posted by: Lyfer

Originally posted by: zodder
Sweet!

Indeed, on a MSI board too! (now thats news)

Whats up w/the MSI boards that I dont know about? Im uning the December 2003 bios btw.

GTA too unstable - clocking back down to 280fsb 3360mhz, 1.55v :brokenheart:

 

[DaveR]

I was able to locate a 2.4c 3333, SL6Z3.
There are no Malaysia's around.

Some say the Most important spec is the M0 stepping.

Can anyone tell me why?

TIA