• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

My 1600+ overclocking experience

N

Necrolezbeast

Senior member
1600+(AGOIA 0213) w/Volcano2 and antec silver compound(anyu good? this is all I could find locally), 256mb generic pc2100, MSI kt3 ultra2, 300w generic PSU, 30gb maxtor 5400rpm, 2gb samsung, QUE! 24x12x40, sblive 5.1 value, Albatron ti4200p 128mb.

I just got my new mobo yesterday, a MSI kt3 ultra2, popped everything in and had a few problems with IDE channels at first but I fixed that. I went straight from 133fsb to 166fsb without problems or changing any voltages. In pcmark I score CPU - 5200 Memory - 3450 HDD - 685(low but usaul for me), and in 3dmark without overclocking vid card I get 9816.
 
I also have ran prime95 torture test for 10 hours overnight without a problem. Max temp was 52c, that is with the side of my case off.
 
Nice. I too have the AGOIA Y week 13, and i am running at 1.74, i used the unlocking trick that involves a pencil(it also involves CUTTING:Q your processor with an exacto knife)........ so with no bus speed changes, no OCing, nothing, my chips boots up at 1.67..... and i just run the FSB at 139, because my board doesn't have the 1/5 divider, i was able to do the whole straight to 166 FSB thing, but HDD corruption ensued..... very bad things....
 
I did a clean install of windows at this speed, after I formatted thinking the IDE problem was driver conflicts...it just seems that the IDE 0 and 1 are written wrong on the mobo and it didn't like my c: boot device on IDE 1. I always seem to take the long and hard way to fixing a problem, hehe, and right after I try it the hard way I figure out how to REALLY fix the problem...I do get pissed quite often. I'm having a little problem with overclocking my vidcard right now. It's the ti4200p 128mb 4.0ns, I can only get it stable at 275/520 and that seems a little low to me...I'm thinking it could have to do with my PSU? Or did I just get a dud in the overclocking section? I'm happy with where it's at, and before I get people telling me that it isn't guaranteed to overclock, I know that. I just want to push every clock out of this card. I guess I'll ask if it is alright to push forth my fsb, to somewhere around 170 or higher?
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top