Mushkin V2 L2

[inveterate]

I'm running the Mushkin V2 L2 @ 2.93 Volts, THe ITE guardian thing puts the voltage in red.. Is it really of concern? like is 2.93 way too high for RAM?

Need comment thxxx

 

[Shimmishim]

no.

2.93 is not too much.

what chips does it use? tccd?

as for the red, you can adjust the settings up so that it doesn't turn red.... that's what i do...

 

[Shimmishim]

just visited the mushkin webpage...

looks like it's tccd.... 2-2-2-X at low voltages and 200 mhz

2.93 isn't too much... you should be fine

 

[AristoV300]

Yeah 2.93v is fine. I would say when you get to the 3.2v area that is the limit.

 

[caboob]

Get a fan blowing over the Ram sticks and you should be good to go for 24/7.

 

[littlezipp]

What FSB did you get these up to on 2-2-2?

 

[inveterate]

My fsb is at .75 X 314 so 235.5mhz @ 2225
But my 3200+ winchester only goz up to 2.512ghz @ 1.552 Volts, so not much pressure there i guess.

 

[inveterate]

and y does my voltage fluctuate. like cpuz and ite guardian will give it sometimes 1.552 sometimes 1.568

 

[Shimmishim]

that's normal... don't worry about the voltage fluctuation

 

[Cha0s]

some of the ram can even run at 3.5V

 

[inveterate]

thx. 1.568 wouldn't kill my winnie would it?