MSI Neo2 network issues

[the FooL]

I installed 5.10 to get the GART driver.
Then installed the 6.39 driver (will try 6.66, but the versions seem the same).

Now when I try to disable the nVidia adapter within XP (Network Connections page), I get a quick BSOD flash and then a reboot.
Anyone else have thise problem?

I don't really want to disable it, just that when I do need to disconnect from the network, it's lot faster than reaching back to unplug the cable.

Also, does MBM support this board for CPU/MB temp detection?
I don't trust MSI Core Center, cause it was showing my CPU temp to be 30C idle while the sys temp was 35C.

 

[Fenuxx]

I've never had that problem before. I'm using the 6.66 driver, so that might have something to do with it . I suggest switching drivers, and see if that helps.

For temp monitoring, I use EVEREST Ultimate Edition. It has been the most accurate of anything that I've tried, as I did some ACTUAL readings with a temp probe to see what my CPU was really running at, and EVEREST came the closest (1-2c higher than actual readings).

 

[the FooL]

I tried switching over to the 6.66 drivers.
Same problem.
The nVidia network controller will crash when I try to disable it (also crashes if I try to un-install the nVidia drivers, since I believe it tries to disable it).
Realtek controller works without a problem.

Switched back to the driver in 5.10 and it works fine.
Oh well.

I'll probably switch over to a non nVidia chipset as soon as a good one is available.
Seems they are going the way all companies go when they get big... drop support for older products ASAP.