• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Motherboard won't POST...HELLLPPP!!

M

Microbman

Member
After a failed attempt to install a new burner and switch slots for video and sound cards, P2B will not post. It barely begins checking the CD Rom drive and then NOTHING. No beeps, no video, nothing at all. Could the MB have been shorted when PCI's were not so carefully switched (they were placed back into their proper slots). Unknown why they were moved. 400 Celery works fine after placing on different board. Celery fans are working on the P2B when power switched on but no post. Any suggestions????
Asus P2B
400 Celery
Matrox Millenium
Monster 3D
SB live
 
Make sure the burner is set as slave to the hard drive and the hard drive is on the primary IDE and the burner jumper set to slave.The cd rom should be in the secondary IDE and its jumper set to master.And i would also reset the CMOS jumper.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top