MotherBoard Monitor

[newuser]

MotherBoard Monitor

Having trouble adjusting the settings for CPU Fan speed
YS tech adj fan, 8RDA+ mobo
I am getting some wierd readings with Fan type: /1 Divider: 4

Also, having trouble setting up the case fan, It reads 0rpm

any suggestions?

 

[Nohr]

I have a YS Tech adjustable fan as well, but an Asus A7N8X Deluxe mobo. The settings I use are type /2, divider 2. It seems to be accurate.

Dunno about your case fan. Perhaps you're using a 3pin header that doesn't support hardware monitoring. Many boards have 3 or 4 fan headers, but only 2 have monitoring support.

 

[newuser]

I'll try that

btw, is there any way to display the MBM voltages with coolmon (already have the mbm fan rpms and cpu temps integrated into coolmon)

 

[newuser]

Well, no such luck today, I think the manual voltage regulator or whatever (knob adjustment) on the ys fan is messing up its speed sensor output. When I crank the speed down manually the RPM's INCREASE. It will do this even in BIOS PC health

Also I tried just leaving the adj knob at 100% then setting up speedfan according to their instructions. When I got everything set-up I would see speed fan adjusting the fan speed on the panel, however MBM showed the rpms stayed the same and the fan indeed stayed at full throttle.

Advice?

 

[Nohr]

Originally posted by: newuser
Well, no such luck today, I think the manual voltage regulator or whatever (knob adjustment) on the ys fan is messing up its speed sensor output. When I crank the speed down manually the RPM's INCREASE. It will do this even in BIOS PC health

For whatever reason, when I'm sat in the BIOS monitoring screen and I adjust my fan speed at all the BIOS will totally freeze. Have to reboot after that.

 

[newuser]

that happened to me as well, but only after adjusting it back and forth a couple times
I was like WTF? the first time it happened