MOST disturbing overclocking adventure EVER

[montypythizzle]

is this bad?
oem hsf.
small oc much juice though (has to be pumped with volts)
btw my vid card is only at 51 idle and at most is 60... and its overclocked alot also on stock cooling

cpu hsf is HAWT so im guessing these are close temps

i have a tt soprano so it should be moving air with 120s in front and back

and 90mm over cpu

67*c cpu 32*c case


cpuz info on oc
http://img93.imageshack.us/img93/1262/2pagecu7.jpg
http://img486.imageshack.us/img486/3121/1pageki4.jpg

THEN later i try to undervolt it from its Volts there only to crash in bf2

THEN i take it back to the right V when the OC was stable and hot and then it is 1.8V
!!!

THEN i get this after messing in bios (somehow):
http://img157.imageshack.us/img157/1450/wtfamidoinvh3.jpg



OH NOES WHAT DO I DO!!!!!?????

should i restart my whole OC adventure?

 

[Ayah]

I don't see anything wrong.

 

[montypythizzle]

67* cpu isnt hot last time i checked it was....

 

[JAG87]

you bastard stop sarcastically bragging.

thats an excellent OC. and 67C is not hot for athlon XP.

 

[montypythizzle]

only a 400 mhz oc for a barton is good? hmm temps have gone down... this is the most unexpected overclocking adventure ever....

 

[JAG87]

dude... almost 2.5 ghz

thats amazing for athlon XP

quit making it looks like you didnt do good, when you know you did so.

 

[montypythizzle]

serious dude when it posted it said 180mhz what i usually get w.o it dying in bf2...

now i get this: http://img135.imageshack.us/img135/694/holymofoocnu1.jpg

i wish i could see what i did to get it like this

i went into clockgen and it only read this: http://img135.imageshack.us/img135/6175/huhmp4.jpg

but if you say so cool

while my cpu is still working

this btw is samsung/kingston ram....
value ram btw

are you sure this is ok?

 

[Hyperlite]

meh...i personally wouldn't be comfortable leaving it at that high of a Vcore without watercooling or something...i ran my mobile barton @ 2.2ghz, 1.7vcore for almost two years before i took it apart a few weeks ago...it was still working fine, but i was using a 92mm tornado and an SLK900A, so load temps were never above 45C. Is that a mobile chip or a normal XP? thats a sick OC for a normal barton, and a pretty darn good one for an XP-M.

 

[montypythizzle]

normal desktop xp on oem cooling

considering my athlon palomino 1800mp (single though) is running at 60 about all the time

my house is hot even w.o the heat on!!!
i cant wait for cool temps

btw im looking into the si97 looking for it online right now cheapest i could find it in stock is at bestbyteinc.com

 

[montypythizzle]

wth i looked yesterday i didnt shutoff the machine but it went back to 2.35......