More than 1.85 volts on an abit KT7-RAID??

[extra]

just wondering if there is any way to get more than 1.85 volts to the chip...
my processor is a 900mhz t-bird running at 1.1ghz
i have water cooling and a peltier so heat is NOT an issue...

 

[MaJik]

take out a resister or find out what pin and just cut off the pin
I ran my Katmai P3 600 at 3.5 volts once covering up a pin on the slot1 card on accident (coverd up 1 too many pins) hehe

really though? i dono

 

[IaPuP]

No.

The KT133 is limited by AMD's specs to 1.85 Volts.

There are methods of increasing this by soldering on the motherboard. If you're up to that, then look around on ars-technica.com I think they have it posted up there somewhere.

Eric