Monitor Screen Cleaning

stonecold3169

Platinum Member
Jan 30, 2001
2,060
0
76
a lint free cloth with distilled water works for me. Definitely don't use any cleaning solutions on them that are no certified to be safe for monitors. There is a coating on your monitor that reduces glare, and you definitely don't wanna take that off.
 

ProviaFan

Lifer
Mar 17, 2001
14,993
1
0
I sprayed a little glasses cleaner on a very soft cloth designed for the purpose to clean one of my older montitors, but noticed that it left barely noticable streaks; thanks for the suggestion, I shall use distilled water and a soft cloth to clean my new 19 incher.
 

Bleep

Diamond Member
Oct 9, 1999
3,972
0
0
You are getting good advice, When I first got a decent computer I went to a office supply store that builds machines and they sold me some Monitor Cleaner in a spray can, It ruined my monitor the first swipe across the monitor and it was sticky, took off 1/2 of the antiglare. Just water and a soft cloth since then

Bleep
 

ProviaFan

Lifer
Mar 17, 2001
14,993
1
0
Originally posted by: ethernaut
Would a lens cleaning cloth do?
Yea, just don't use lens cleaning solution. The stuff I used screwed up my older monitor (as stated above).
 

John

Moderator Emeritus<br>Elite Member
Oct 9, 1999
33,944
3
81
60 grit sandpaper

or

100% cotton cloth (t shirt) dampened w/ a hint of H2O
 

ProviaFan

Lifer
Mar 17, 2001
14,993
1
0
Originally posted by: dcdomain
How bout them LCD panels?
Good question. The LCD panel on my kodak digicam could use a cleaning (with the placement of the LCD on the DX3500 model, it is very hard to keep one's nose from touching the LCD when using the viewfinder ;)), and my TI-89's screen could be cleaned as well. Would the lens cloth with a hint of dihydrogen monoxide work well in this situation also?
 

Pardus

Diamond Member
Jun 29, 2000
8,197
21
81
I turn off my monitor, let it cool down for 10 mins, get some windex, spray it on a wrag, clean the monitor, let it dry real good and its clean. Don't see a need to buy special cleaning kits, though some will disagree with me. Been doing it this way for years, never had a problem.

Just make sure you let it cool down first and dry completely after.
 

ProviaFan

Lifer
Mar 17, 2001
14,993
1
0
Originally posted by: ActiveX
I turn off my monitor, let it cool down for 10 mins, get some windex, spray it on a wrag, clean the monitor, let it dry real good and its clean. Don't see a need to buy special cleaning kits, though some will disagree with me. Been doing it this way for years, never had a problem.

Just make sure you let it cool down first and dry completely after.
Uh, I was told that windex and similar chemicals leave a residue on the surface that they are used to clean; thus, it's not good to use them on eyeglasses, or [presumably] monitors. Can anybody confirm this?
 

DuffmanOhYeah

Golden Member
May 21, 2001
1,903
0
0
I know some people will think I am stupid, but I have always just used Windex sprayed onto a paper towel. I have a Trinitron CRT with an anti reflective coating, and never had any problems. Coating is still in-tact. Just my $.02