Monitor resets my 360 everytime i switch the input to it

[Nvidiaguy07]

I use my Asus VG236H 3D Monitor for my PC, and my 360. I have my sound going from my 360, into my PC, and from there they share the same speakers.

For some reason, whenever I switch TO the HDMI input that my 360 is connected to, it resets the 360. It doesn't do this if im playing a game a switch from the 360 to the PC input, because i can hear the game and its fine.

Is there a setting somewhere either in the monitor or the 360 so it will stop sending a signal to reset when the input is switched to?

 

[chimaxi83]

If the 360 is powered off, does switching to its input on the monitor make it power on?

I know some TVs can send a power on signal to the device its connected to, when its switched to that input, if its connected with HDMI. I'm not familiar with the Asus menus so I can't be of much help, but try looking for something along those lines.

 

[Nvidiaguy07]

If the 360 is powered off, does switching to its input on the monitor make it power on?

I know some TVs can send a power on signal to the device its connected to, when its switched to that input, if its connected with HDMI. I'm not familiar with the Asus menus so I can't be of much help, but try looking for something along those lines.

Just tried, it didnt turn on.

 

[Nvidiaguy07]

think i may have found the problem: http://gaming.stackexchange.com/que...change-the-input-on-my-tv-unplug-the-hdmi-cab

I have the video hooked up through HDMI, and the sound is through a composite cable i have plugged in. I guess it switches back and forth when i switch back and thats why it resets? WTF. anyone have any suggestions on what to try?

 

[chimaxi83]

Yea, 360 will reset if the AV cable is unplugged, in order to detect and change to a new resolution. Sounds like the issue itself would be in 360 settings, but I don't see anything for that :/