Molex question.

[Ragnarock]

Okay, so I have 1.2 Tbird setup, non-oc'ed, cooled by a pair of 92mm Sunons. I'm looking to quiet this thing down for awhile until I build my wooden case, at which point I'm thinking I might want to have them running at full speed again. My question is, how do I do this? Which wires do I cut, soldier, etc?

 

[agentK]

run it in 5 volts. you might want to check though if your 92mm fans will start normally as some fans wouldnt when underpowered. if they work fine, attach the red wire to the red wire and the black to black. yellow is the color code for +12v and red for +5v.
if it has problems starting, you need to increase it to seven volts. you can do this by joining the 12 with the 5 to get seven. search around modding sites and theyll give you detailed instructions as to how to get about this. good luck!

 

[Neuroanatomist]

Here's a site with directions. Look under section "Fans, making them quieter"

directions on how to make fans run at 5V or 7V @ 7volts.com

 

[Ragnarock]

Ah, great. Thanks a lot, guys.