mobo not recognizing cpu

[Crusty]

I got a MSI Master K7-S. It says it supports up to xp2000+. So i bought one, flashed the bios to gain support for it, but when it boots it says Athlon 1250 mhz. Why not Athlon xp 2000+? It has a 12.5x multiplier if i'm not mistaken so 12.5x133 = 1662.5 and 12.5x100=1250. So im not running at 133mhz bus. So i go into the bios to change it, no jumpers to do it. I can change voltage, frequency, and multiplier. I leave voltage at default 1.750. Frequency i set at 133, and leave multiplier at default, the only other options are 13x and 14x....seems kinda weird. Any ideas?

 

[Anubis]

is there a jumper on the Mobo to switch between 100 and 133 FSB?? there is on my Epox 8KHA+ might wanna check that

 

[Crusty]

So i go into the bios to change it, no jumpers to do it.

no there isn't.

 

[ChampionAtTufshop]

cmos reset?
you never know

 

[Crusty]

Tried it numerous times because it wouldn't post with the fsb set to 133.

 

[ChampionAtTufshop]

Originally posted by: MCrusty
Tried it numerous times because it wouldn't post with the fsb set to 133.

so the system wont post at 133fsb, or it would post at 133fsb but still show up as 1250mhz?

 

[Crusty]

Sorry, should have been clearer. Wouldn't post at 133. my ram is Corsair XMS PC3200 cas2 512mb. So i dont think that is the problem.

 

[mrman3k]

Does it work after a CMOS reset? If it still doesn't work, I think it is a dead mobo.

 

[Crusty]

The board boots into 100, not 133. I dont think it is dead, i just think i am overlooking something somewhere.