I just built my new system, everything was installed and working fine, I left it in to have a hardware issue corrected when I got it back I tried to install my mobo drivers and now Im getting a DOS error that i didn't get before. Im guessing its a BIOS issue, cause Id ont' see how it could be anything else. is there some way I can reset or wipe the mobo's bios?
am running Asus p5k mobo
xp installs fine
all parts are new and nothing is loaded at present.
This is the error I recieve during boot up after loading the first mobo driver
FreeDOS kernel version 1.1.35w (Build 2035w-UNSTABLE, Nov 30 2005)
kernel comaptibility 7.10 - WATCOMC - FAT32 support
Copyright 1995-2005 Pasquale Villani and the FreeDOS Project.
NO WARRANTY. Licenced under the GNU Gereral Public License version 2.
C: HD1, Pri[ 1], CHS= 0-1-1, start= 0 MB, Size= 31MB
*when I boot from the driver disc I get this message, if I boot from the HD first It doesnt' appear*
hit f8 to trace or f5 to skip autoexec.bat
*there is about a 60 to 120 second pause before I recieve the following*
Bad or Missing Command Interpreter
Enter the full shell command line:
command.com/P /E:256
any ideas anyone?
am running Asus p5k mobo
xp installs fine
all parts are new and nothing is loaded at present.
This is the error I recieve during boot up after loading the first mobo driver
FreeDOS kernel version 1.1.35w (Build 2035w-UNSTABLE, Nov 30 2005)
kernel comaptibility 7.10 - WATCOMC - FAT32 support
Copyright 1995-2005 Pasquale Villani and the FreeDOS Project.
NO WARRANTY. Licenced under the GNU Gereral Public License version 2.
C: HD1, Pri[ 1], CHS= 0-1-1, start= 0 MB, Size= 31MB
*when I boot from the driver disc I get this message, if I boot from the HD first It doesnt' appear*
hit f8 to trace or f5 to skip autoexec.bat
*there is about a 60 to 120 second pause before I recieve the following*
Bad or Missing Command Interpreter
Enter the full shell command line:
command.com/P /E:256
any ideas anyone?
Facebook
Twitter