Mobile XP 2500 or 2600?????

[J22]

Is it worth the extra $9 for the 2600?

Do the mobiles use standard XP heatsinks? ie Thermaltake SLK900A?

 

[BlueWeasel]

Bump cause I'd like to know as well.

Yes, the mobile chips are physically identical to the desktop Barton chips. Therefore, any typical HS (ie, SLK) will work fine.

 

[myocardia]

It's only worth the extra if you are looking for the absolute highest speeds you can get. The reason is that the chip is slightly better, it will run at a higher clockspeed than the 2500's will at the same 1.45v.

 

[AMDfreak]

I have a mobile 2500+ IQZFA 0349 that does 2505 w/ 1.9 vcore. Check my sig for full specs. I also have a mobile 2600+ on the way. I'll let ya know next week which is better. 😉

 

[MegaWorks]

Originally posted by: AMDfreak
I have a mobile 2500+ IQZFA 0349 that does 2505 w/ 1.9 vcore. Check my sig for full specs. I also have a mobile 2600+ on the way. I'll let ya know next week which is better. 😉

nice sig but the voltage you're using might kill your CPU, also I'm getting my mobile barton soon I will do some test on it
Patch code: IQYFA 0349 MPMW

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nForce2-U400)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Maxtor 91531U3 15GB
2x Western Digital WD400BB 40GB serials
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1

 

[BD231]

I bought the 2600+, currently at 2400mhz at 1.6V.

You might as well go for the best you can get, this really is the end of the line for Socket-A*.

 

[Neyd3400]

x2. Probably the last time you'll upgrade with that board.

 

[pillage2001]

Originally posted by: BD231
I bought the 2600+, currently at 2400mhz at 1.6V.

You might as well go for the best you can get, this really is the end of the line for Socket-A*.

What stepping did you get?

 

[BD231]

IQYHA

 

[Noid]

My 2400M arrived today.. IQYHA 0346 from NewEgg

It booted W2K at 12 x 215.5 no sweat, but failed benchies...

Now at 11.5 x 217.2 = 2497 (aaaah wtf ... 2.5ghz 🙂 )

Still need more time on P95, but no errors for an hour so far...
I'm pumping more voltage than I like thou ...
,,, but,,, I'm beginning to think I dont need it either...

I will post my final results tomorrow.

 

[pillage2001]

Originally posted by: Noid
My 2400M arrived today.. IQYHA 0346 from NewEgg

It booted W2K at 12 x 215.5 no sweat, but failed benchies...

Now at 11.5 x 217.2 = 2497 (aaaah wtf ... 2.5ghz 🙂 )

Still need more time on P95, but no errors for an hour so far...
I'm pumping more voltage than I like thou ...
,,, but,,, I'm beginning to think I dont need it either...

I will post my final results tomorrow.

What voltage are you on?