mITX case for gpu and cpu watercooling

[oslama]

Is there a smallish case that can accommodate antec kuhler 620 for gpu and corsair h100i for cpu watercooling.


I tried the Bitfenix Progidy M. The components did fit but the side panels were a pain to reattach and i ended up bending the frame.

Parts:

i4790k
asus z97I plus
gskill sniper

 

[lehtv]

Thermaltake Core V21, perhaps? Motherboard vertically, Antec Kühler in the rear slot, H100i on the top.

EDIT: Also check out HAF Stacker 915F. Antec in the rear, H100i in the side panel.

 

[oslama]

Does the corsair 250D have enough room for water cooling?

 

[lehtv]

Not sure why you need to ask, as this information is easily available on the manufacturer's website: http://www.corsair.com/en/obsidian-series-250d-mini-itx-pc-case

It does seem to support 240mm on the side and 120mm on the front, I'm just not sure if you can have rad+fan on both locations at the same time.

 

[dougp]

Does the corsair 250D have enough room for water cooling?

No, there is not enough clearance for the sidepanel to attach due to AIO hoses. I used a H100i on my CPU and H80in my GPU, ended up shorting contacts because of pressure on the video card.

 

[Stuka87]

My Corsair 380T has a specific mount for the H100i.

You could probably mount the other cooler up front. But... The hoses may be an issue on the GPU. And this will be the case with most ITX cases.

You really need to move up to a mATX case to do what you want. Like a Corsair Air 240.

 

[clok1966]

Is there a smallish case that can accommodate antec kuhler 620 for gpu and corsair h100i for cpu watercooling.


I tried the Bitfenix Progidy M. The components did fit but the side panels were a pain to reattach and i ended up bending the frame.

Parts:

i4790k
asus z97I plus
gskill sniper

any pictures, I really like this case and have made 3 builds with it, media server/server, and 2 ok budget build gamers for friends. I have been looking at one for My new PC (been a few years, time to upgrade). I would like to see the problems you ran into. I wasn't going to do video card cooling, but with that case it might be necessary? What whre you using component wise?

 

[oslama]

any pictures, I really like this case and have made 3 builds with it, media server/server, and 2 ok budget build gamers for friends. I have been looking at one for My new PC (been a few years, time to upgrade). I would like to see the problems you ran into. I wasn't going to do video card cooling, but with that case it might be necessary? What whre you using component wise?

did not take pics

Components:

i4790k w/ H100i
asus z97I plus itx mb
8gb gskill sniper
Evga 780 SC w/ Antec 620 Kuhler
Corsair 600M PSU
Crucial 512GB ssd w/ 500gb and 2tb HDs

I was sure that everything would fit in the Prodigy M. It took couple of trys to get everything to fit but it was a great hassle trying to get the side panels back on and in that process i ended up bending the frame and damaged the pins on the usb panel on the mother board. I returned the case and mother board.

Prodigy M would be perfect if it had the pw/rst buttons and USB ports on the front instead of the side

 

[oslama]

I went with Corsair 250D and removed the video watercooler.