memory voltage

[Dutchmaster420]

my memorys website says its specified timings are 4-4-4-12 at 2.2v

im running them at 5-5-5-12 and 1.92

im not ocing my cpu

this is enought voltage for them at these timings right, or should i boost it a little

 

[raincityboy]

I am not even going to ask why, but just suggest memtest 86.
If you get an error you probably need more juice.

 

[Dutchmaster420]

why what?

if you mean why i dont run them at their rated speeds?

i have 4 1gb sticks and they wont run at the rated speeds


edit:Memtest wont work with 64bit windows it said

 

[myocardia]

Originally posted by: Dutchmaster420
edit:Memtest wont work with 64bit windows it said

MemTest doesn't work with any Windows, it runs in DOS.

 

[Dutchmaster420]

i know...but when i tried to run it even in dos...it gave me the message "does not work with 64bit windows"

whatever im just going to put volatge at 2.0 and thats that

 

[henryay]

Just boost it to 2.2V and run it at 4-4-4-12.
Also, you cannot run memtest in command prompt in windows.

 

[Dutchmaster420]

i tired running at 4-4-4-12 at 2.2v

wouldnt work

its hard to run at specified timings when you have 4gb

im sure if i only had 2gb it would work fine

 

[Zepper]

Memtest runs under raw DOS booted from diskette or CD. It comes on the Ultimate Boot Disk for DOS - you can DL the ISO and burn your own copy. Also I don't trust any of the voltages reported by the BIOS or hardware monitor software. Use a DMM (digital multimeter) to adjust them properly.

.bh.