• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

memory errors

S

soccermaniac88

Junior Member
I am running windows 7 64 bit and recently I have been experiencing some unexpected shut downs. I decided to run memtest86+ and received over 250 errors for test #8 (Modulo 20, Random Pattern). I am pretty inexperienced with this sort of thing and I was wondering if anyone could help me figure out what these results mean. I am currently using 4 x 2gb A-Data DDR3 RAM. Any help would be greatly appreciated!
 
Have you read any of the tech support information about troubleshooting errors at the memtest86+ site?
 
Last edited:
Easy, go into your BIOS, and adjust the timings and voltage to that specified by the mfg.
If you still have problems, something could be defective.
 
A-Data is not first rate memory. Try removing 2 modules, from the same bank (identically colored DIMM sockets), and test again. If the remaining modules pass, substitute them with the previously removed ones, and test a third time.

Try the other Memtest, Memtest86 v. 3.5a, especially test 5, which tends to fail the memory more often than all the other tests.
 
bryanl said:
A-Data is not first rate memory. Try removing 2 modules, from the same bank (identically colored DIMM sockets), and test again. If the remaining modules pass, substitute them with the previously removed ones, and test a third time.

Try the other Memtest, Memtest86 v. 3.5a, especially test 5, which tends to fail the memory more often than all the other tests.
Click to expand...

The non-plus version of Memtest is very broken indeed. I would not recommend using it.

(The last system I tried it on, it would just reboot after loading, repeatedly.)
 
VirtualLarry said:
The non-plus version of Memtest is very broken indeed. I would not recommend using it.

(The last system I tried it on, it would just reboot after loading, repeatedly.)
Click to expand...
I have to admit not being familiar with Memtest86 3.5A on newer hardware, but it did manage to work with 8MB of DDR3, while 3.5 failed on everything I tried, including a computer using just a single 2GB DIMM. I haven't had such a disaster with MemTest+ 2.11, but like many other memory diagnostic I've tried, including Memtest86 3.x, it did occasionally reboot just after loading, I believe always due to memory that was eventually proved defective.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top