Iwill MPX2 (AMD MPX Chipset) w/ 4 sticks of ECC Registered memory.
SLOT1: 1 x 1 GB CAS 2 Corsair
SLOT2: 1 x 1 GB CAS 2.5 Samsung
SLOT3: 1 x 1 GB CAS 2.5 Samsung
SLOT4: 1 x 512MB CAS 3 Generic
Machine boots and I select the 'optimal settings' choice in the BIOS, which sets memory to run based on SPID.
Machine reboots from CD and I run Memtest86 with default test settings and after 14 hours, three test iterations pass with no errors.
In this scenario, is my memory setup basically OK and if I am having errors, I should look elsewhere, because the memory (via Memtest86) is known to be OK?
SLOT1: 1 x 1 GB CAS 2 Corsair
SLOT2: 1 x 1 GB CAS 2.5 Samsung
SLOT3: 1 x 1 GB CAS 2.5 Samsung
SLOT4: 1 x 512MB CAS 3 Generic
Machine boots and I select the 'optimal settings' choice in the BIOS, which sets memory to run based on SPID.
Machine reboots from CD and I run Memtest86 with default test settings and after 14 hours, three test iterations pass with no errors.
In this scenario, is my memory setup basically OK and if I am having errors, I should look elsewhere, because the memory (via Memtest86) is known to be OK?
