looking for specific fan controllers

[Fullmetal Chocobo]

I currently have two Zalman 6-channel fan controllers and one ThermalTake Hardcano 13. I tried the Sunbeam Rheobus, but it doesn't fit in my case due to the mount sticking out towards the front (look at pic #3 in that link to see what I mean).

I don't mind the Zalman's, but I just had all of the LEDs go out on one of them, and I need something that goes from off to 12V. And the fan control on the Hardcano 13 is just about useless as far as I'm concerned...

I have 10 case fans that need to be controlled (8 of them with the range of 0-12V, two would be fine with 7-12V), as well as two CPU fans (7-12V range is fine), and possibly two other 92m fans if I can find a controller for them.

SUMMARY:
I'm looking for fan controllers that will fit in my case, and have the following specs:
8 fans @ 0-12V range
4 fans @ 7-12V range

I could easily do 3 - 4 different fan controllers, or in different combinations...

 

[Zepper]

What "Pic 3"??? What case?

.bh.

 

[zagood]

How about the Sunbeam Theta? 8 channels, software controlled:
http://www.planetamd64.com/lofiversion/index.php/t14542.html

-z

 

[Fullmetal Chocobo]

Originally posted by: Zepper
What "Pic 3"??? What case?

.bh.

Ugh, incorrect linkage. Sorry about that. The link has been corrected. This is the fan controller, and if you look at the 3rd picture, it showes how the frame bevels out towards the front. That bevel makes it unable to fit in my case.

 

[GalvanizedYankee]

Send me the Sunbeam and a blank bay cover. Mark the inside of the bay cover for
up with an arrow=Done deal.


...Galvanized

 

[Zepper]

What case are you trying to put the Sunbeam in?

.bh.

 

[Fullmetal Chocobo]

Originally posted by: Zepper
What case are you trying to put the Sunbeam in?

.bh.

Enermax FS2300BB.

 

[Fullmetal Chocobo]

Originally posted by: zagood
How about the Sunbeam Theta? 8 channels, software controlled:
http://www.planetamd64.com/lofiversion/index.php/t14542.html

-z

I considered something like this, but what happens to the fans before the software comes up? Do they max out, or do they idle, or stay off? I'd hate to risk critical fans on something like that. Also, the 10w max per channel might pose a bit of a risk for some of the fans... I'm definitely keeping an eye on this though. Thanks.