Looking for investors

Toggle sidebar Toggle sidebar
SagaLore

SagaLore

Elite Member
Dec 18, 2001
24,036
21
81
Please donate to my project. Reply back how much you're willing to give me. If all the replies don't add up to $100k or greater, then the deal is off. Serious* replies only.




*disclaimer: Not really. The project is real, but I don't have the documentation yet to really market feasibility. When I do, I will put together a promo site and start a real thread. :)
 
C

Cristatus

Diamond Member
Oct 13, 2004
3,908
2
81
Maybe it would help if you posted a little bit of details of the project, then maybe people would even consider considering to donate to your cause.
 
HardcoreRobot

HardcoreRobot

Lifer
Nov 7, 2000
16,403
3
81
i will send you a money order via western union for 500,000, you can keep the extra for your troubles. please send the merchandise at your earliest convenience
 
D

dxkj

Lifer
Feb 17, 2001
11,772
2
81
Note: If you are asking for 100k on atot for a project, you arent worth investing in.... if it was real you would be drumming it up on legit lines.
 
SagaLore

SagaLore

Elite Member
Dec 18, 2001
24,036
21
81
Originally posted by: dxkj
Note: If you are asking for 100k on atot for a project, you arent worth investing in.... if it was real you would be drumming it up on legit lines.
Click to expand...

This is true.
 
SagaLore

SagaLore

Elite Member
Dec 18, 2001
24,036
21
81
Originally posted by: OrByte
I'm serious.

what is your project?
Click to expand...

I am redesigning the DKM version of the Wankel rotary, Felix's first rotary until NSU compromised it with a stationary housing (the KKM model, used in Mazda's RX7/RX8). The first and only DKM test engine exceeded 25,000 RPM successfully and smoothly.

And it will be running off Ethanol using modern technologies to remove the original disadvantages of the DKM. Before anyone starts any debates about the negative energy impact of producing ethanol using corn byproducts - I found a company that has developed a catalytic process that creates ethanol with nothing more than solar energy, co2 from the air, and water.

I thought my project was hopeless until I found a company in Oregon that still rebuilds rotaries. They can custom make any design I give them, but they aren't going to take me seriously if I don't have the cash to back up my design.

I started a previous thread about working with my college on such a project, but that may not work out to my advantage.
 
MoPHo

MoPHo

Platinum Member
Dec 16, 2003
2,978
2
0
If this is like that last idea you pitched to me about the siamese twins, a bunch of bananas, and a "Legs of Steel" video featuring David Hasselhoff...its a no go...
 
I

imported_Dimicron

Senior member
Jan 24, 2005
327
0
0
I'm looking to have the largest pr0n collection in the known universe. I need the funds for a massive file server. Anyone who donates will receive log in info. Service guarantees citizenship and all that :)

Oh, wait, ya'll wern't talking to me :D

:beer:
 
S

Stuxnet

Diamond Member
Jun 16, 2005
8,392
1
0
Originally posted by: SagaLore
Please donate to my project. Reply back how much you're willing to give me. If all the replies don't add up to $100k or greater, then the deal is off. Serious replies only.
Click to expand...

Can I give you $200k? Where do I send the cash?
 
A

ajpa123

Platinum Member
Apr 19, 2003
2,401
1
0
Originally posted by: SagaLore
Originally posted by: OrByte
I'm serious.

what is your project?
Click to expand...

I am redesigning the DKM version of the Wankel rotary, Felix's first rotary until NSU compromised it with a stationary housing (the KKM model, used in Mazda's RX7/RX8). The first and only DKM test engine exceeded 25,000 RPM successfully and smoothly.

And it will be running off Ethanol using modern technologies to remove the original disadvantages of the DKM. Before anyone starts any debates about the negative energy impact of producing ethanol using corn byproducts - I found a company that has developed a catalytic process that creates ethanol with nothing more than solar energy, co2 from the air, and water.

I thought my project was hopeless until I found a company in Oregon that still rebuilds rotaries. They can custom make any design I give them, but they aren't going to take me seriously if I don't have the cash to back up my design.

I started a previous thread about working with my college on such a project, but that may not work out to my advantage.
Click to expand...

? say what ?
Good Luck with it :beer:
 
kitkat22

kitkat22

Golden Member
Feb 10, 2005
1,464
1,333
136
Just a bit of advice; if you want someone to invest you have to prove to them their money is being put to good use and have the documentation to back it up. It's not easy to get someone to cough up 100k unless they know they will get either a return on investment or some other benifit. Create a website of what you want to do, show diagrams (not too much in detail), go to other sources. ATOT is probably not one of the best places to go because of the nature of the forum. Anyhoo, good luck! (I have no investing power so in that respect I can't help)
 
A

ajf3

Platinum Member
Oct 10, 2000
2,566
0
76
I have a Nigerian uncle who needs help transferring some cash out of country... I'll give him your number ;)
 
D

dxkj

Lifer
Feb 17, 2001
11,772
2
81
Originally posted by: SagaLore
Originally posted by: OrByte
I'm serious.

what is your project?
Click to expand...

I am redesigning the DKM version of the Wankel rotary, Felix's first rotary until NSU compromised it with a stationary housing (the KKM model, used in Mazda's RX7/RX8). The first and only DKM test engine exceeded 25,000 RPM successfully and smoothly.

And it will be running off Ethanol using modern technologies to remove the original disadvantages of the DKM. Before anyone starts any debates about the negative energy impact of producing ethanol using corn byproducts - I found a company that has developed a catalytic process that creates ethanol with nothing more than solar energy, co2 from the air, and water.

I thought my project was hopeless until I found a company in Oregon that still rebuilds rotaries. They can custom make any design I give them, but they aren't going to take me seriously if I don't have the cash to back up my design.

I started a previous thread about working with my college on such a project, but that may not work out to my advantage.
Click to expand...

I love rotaries... that sounds cool, but people are going to want a lot of proof before they shell out any money... heck, let me invest in the company who uses oslar energy.
 
D

DaShen

Lifer
Dec 1, 2000
10,710
1
0
Originally posted by: SagaLore
Originally posted by: OrByte
I'm serious.

what is your project?
Click to expand...

I am redesigning the DKM version of the Wankel rotary, Felix's first rotary until NSU compromised it with a stationary housing (the KKM model, used in Mazda's RX7/RX8). The first and only DKM test engine exceeded 25,000 RPM successfully and smoothly.

And it will be running off Ethanol using modern technologies to remove the original disadvantages of the DKM. Before anyone starts any debates about the negative energy impact of producing ethanol using corn byproducts - I found a company that has developed a catalytic process that creates ethanol with nothing more than solar energy, co2 from the air, and water.

I thought my project was hopeless until I found a company in Oregon that still rebuilds rotaries. They can custom make any design I give them, but they aren't going to take me seriously if I don't have the cash to back up my design.

I started a previous thread about working with my college on such a project, but that may not work out to my advantage.
Click to expand...

WOW!!!... If you can get this to work well, :thumbsup:

There are already people saying it will take more energy to create ethanol than producing it. I don't have much money right now, but I could pitch in a bit. I would have to verify legitimacy though.
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom