KT7ARaid at FSB133?

ttenn

Junior Member
Feb 28, 2000
7
0
0
Can anyone help with this??

I have a AXIA Tbird 1G that I have been trying to OC. However, I think
I am having trouble with the KT7ARaid board not wanting to go over 105 fsb.
I am stable at 10x100=1000 (stock) but can't get 6x133=800 (slower than
stock). I also can't get 7.5*133=1000. I have PC133 that I have run at
133 for the last year in my old P3 system. I also have removed the SBLive
and NIC. CPUFx HSF and delta fan (idle=30, full=50). I do have the L1
bridges connected. Shouldn't I be able to do 6x133=800 with a 1G chip?

When set to 133 fsb, it posts ok, but won't boot into Windows. I also can't
get it to POST at 100 fsb when I have the memory set to FSB+PCI.

I am thinking it is the MB or memory controller not wanting to go this fast.
As I said, the memory can take 133 as it was used in a previous system.

Any ideas? Anyone else with the KT7ARaid have this problem?

Tom
 

gimps

Senior member
Nov 6, 2000
383
0
0
Try setting the CAS to 3 for the RAM.
Depending on the brand of RAM, most PC133 memory is only rated CAS3.