Okay, long story short, card worked when flashed to 700/1700, I got greedy and penciled the Q511 resistor down to 760 ohms and got 2.03v upon startup. Got the mobo LOGO and even the " _ " at the top left corner during system startup, then . . . . . . . nothing. I consistently get these results, I can even go into bios and see everything, I can hit F8 and see the alternate boot options and all the way to " MUP.sys " ( I believe ) during a safe mode boot then BLACK SCREEN OF DEATH !!!!!
I'm thinking I may have possibly maybe killed the card, any other thoughts on this ?
My card has the BJ11 1.1ns Samsung ram so it should be able to handle up to 2.1v easy by design.
After testing it to the best of my ability nothing has changed. It is indeed to the best of my knowledge toastied : ) Chock one up to the greedy card killer club : )
I'm thinking I may have possibly maybe killed the card, any other thoughts on this ?
My card has the BJ11 1.1ns Samsung ram so it should be able to handle up to 2.1v easy by design.
After testing it to the best of my ability nothing has changed. It is indeed to the best of my knowledge toastied : ) Chock one up to the greedy card killer club : )
Facebook
Twitter