Just got my t-bred 2100+ from newegg, GREEN aiuhb 0303, anyone have an 0303?

[dannybin1742]

anyone know how well the 0303s overclock? i know there are other threads, but i don't want to look through 751 posts, does anyone have an 0303- how far will it go on default voltage? is it normal for the t-bred to have the green packaging? or are they half and half- green or brown?

 

[dannybin1742]

a bit of the bump

 

[RadDavy]

I've had a 2100+ 0303 for 2 weeks now. It's a good overclocker and runs cool. This one runs fine at 2250Mhz@360fsb. Not sure what the limit is on it, it ran ok at 2275Mhz but i slowed it down when i increased the fsb.

 

[Mangler]

Just got an AIUHB 0303 from newegg today also...so far so good at 166FSB on a system I am building

 

[pillage2001]

Originally posted by: RadDavy
I've had a 2100+ 0303 for 2 weeks now. It's a good overclocker and runs cool. This one runs fine at 2250Mhz@360fsb. Not sure what the limit is on it, it ran ok at 2275Mhz but i slowed it down when i increased the fsb.

What voltage were you on?

 

[RadDavy]

Originally posted by: pillage2001

Originally posted by: RadDavy
I've had a 2100+ 0303 for 2 weeks now. It's a good overclocker and runs cool. This one runs fine at 2250Mhz@360fsb. Not sure what the limit is on it, it ran ok at 2275Mhz but i slowed it down when i increased the fsb.

What voltage were you on?

I have had it set on 1.74V since I enabled 333 fsb and overclocked it. I haven't tried higher voltage as I want to keep it for a while. The temp hasn't gone over 105F while gaming or prime95. I'm using a sk6/ 80mm 53cfm fan.

 

[dannybin1742]

i'm using the shuttle nf2 baby pc, it has no voltage adjustments, do you think it would be alright if i just close the appropriate L11 gates to get 1.75 volts? do you think the psu could handle it since its supposed to be able to handle non t-bred cpus? so in other words it would be like putting a palomino core in there and running 1.75 V

 

[dannybin1742]

bump

 

[aircooled]

Just received a brown one from newegg today to replace my 1600+.

AIUHB0303MPM is printed on it.

13x166FSB default voltage out of the box @ 38C (100F) under normal usage. Will put it under load shortly to see how high the temps go, but it's already cooler than my 1600+.

Shuttle AK35GT2, muskin 2700 RAM (3x512), SLK-800 w/80mm Vantec Stealth.

WCPUID copy/paste below:
[ WCPUID Version 3.1a (c) 1996-2002 By H.Oda! ]

Processor #1 : AMD Athlon XP (Model 8) / 60B3B464
Platform : Socket A (Socket 462)
Vendor String : AuthenticAMD
CPU Type : Original OEM Processor (0)
Family : 6 (7)
Model : 8 (8)
Stepping ID : 1 (1)
Brand : ----
APIC : ----
HT Log.CPU Cnt : ----
Name String : AMD Athlon(tm) XP 2700+

Internal Clock : 2165.06 MHz
System Bus : 333.09 MHz DDR
System Clock : 166.54 MHz
Multiplier : 13.0

L1 I-Cache : 64K Byte
L1 D-Cache : 64K Byte
L1 T-Cache : ----
L1 Cache : ----
L2 Cache : 256K Byte
L2 Speed : 2165.06 MHz (Full)

MMX Unit : Supported
SSE Unit : Supported
SSE2 Unit : Not Supported
MMX2 Unit : Supported
3DNow! Unit : Supported
3DNow!+ Unit : Supported

Host Bridge : 1106:3099.00 [VIA Apollo KT266/A,KT333]
South Bridge : 1106:3147.00 [VIA VT8233]
VGA Device : 1002:514C.00 [ATI RADEON 8500/8500LE]
Memory Size : 1536M Byte
Memory Clock : ----

 

[bkmartin]

I have played with one of these from newegg for the last 2 days (0303 2100+). I saw the following:

13x166 @ 1.65V 40C max temp running prime95 - stable - fan 2300 rpm
13.5x166 @ 1.70V 41C max temp running prime95 - stable - fan 2500 rpm
14x166 @ 1.75V 41C max temp running prime95 - stable - fan 2700 rpm

15x multiplier was a no-go even up to 1.85V. Might try seeing what I can do with the FSB next. This was running with Asus A7N8X Deluxe, SK-7 Heatsink, and Smart Fan 2 (running in thermally controlled mode), and Kingston 512Mb PC2700 DDR. Idle temps with all three multipliers were around 35-36C.

Brian

 

[dannybin1742]

just tried my 0303 green chip at 13X166 on default 1.6V ---->no post

i'm waiting for shuttle to get back with me on the pci and agp lock in my nf2 baby pc

i'm sure if i closed the appropriate L11 brideges and got 1.7V it could easily do it